Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
We have made same proxmark3 board in China. And it is cheap for students and persional(for company we have a higher price).
We will give manual for beginners. The firmware we download is R480.
contact:
phone: 13113330725
mail: laser21@163.com
MSN: xfpga@hotmail.com
http://item.taobao.com/item.htm?id=10270073341
我们这个电路板和官方的完全一样。
Last edited by laser (2011-08-20 15:58:38)
How much would shipping one of these cost to NZ via Hong Kong Post Registered mail?
We use the Gerbers from (http://cq.cx/proxmark3.pl) to produce the board, the picture was taken from our own board.
The cost:(yuan)
board:980
Delivery costs:210 (China EMS)
(http://www.ems.com.cn/internetPostageAc … otoPostage)
total:1190yuan = $184
no idea...
The board I saled is the same as the author released.
Here is some picture, the tune voltage is about 12v.
http://hi.baidu.com/xfpga/album/Proxmark
Many RFID company in China bought this board for snoop the communication between reader and card.
Hi vivat
I use a mobile phone to take the photo(2Mega pixel). The board is working well, all of them have more than 11v.
I make a 13.56MHz pcb antenna a few days ago, and it will return soon. The design file was taken from this forum, the board is very small, only 3mmx5mm, I will report the result later.
The PCB antenna can be seen in
http://hi.baidu.com/xfpga/blog/item/54d … e6ff2.html
The hf tune voltage is about 8.6v, and can use it to reader a mifare card.
But it can not snoop the communication between a reader and a card. Why?
I can use it this board to snoop using the antenna design by reol.
I have also purchased a proxmark3 from laser (ebay) ... very fast shipping !!!
regards Spinoinside (Italy)
Hi, all
We have made LF antenna using the pcb provided by author J.Westhues, we only alter the adaptor(USB adaptor). and thanks jose from spain, he help me alter the adapt connector.
13 dollars pcs.(including LF antenna and a adaptor,usb to mini 4pin)
Which is the price for antenna 13.56MHz? Have you still problems with snoop? Which is the voltage of antenna before and after a RFID Mifare? Could you permit to see also the test with other tags?
Thank you
here is our new webpage:
http://www.xfpga.com/P_view.asp?pid=374
we also provide OEM service and PCB manufactory.
http://www.xfpga.com
any questions, please email to us at: laser21@163.com or gezhitech@163.com
Hi all,
Just received the proxmark board + antennas + test cards + usb & hirose cable from this seller, via http://www.xfpga.com/.
Everything works well.
------------------------------------------------------------------------------
// Just connected LF antenna and tried to identify an em4x card :
------------------------------------------------------------------------------
$ ./client/proxmark3.exe
Connected units:
1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 500-suspect 2011-11-10 14:34:13
#db# os: svn 500-suspect 2011-11-10 14:34:41
#db# FPGA image built on 2009/12/ 8 at 8: 3:54
proxmark3> hw tune
#db# Measuring antenna characteristics, please wait.
# LF antenna: 13.29 V @ 125.00 kHz
# LF antenna: 10.47 V @ 134.00 kHz
# LF optimal: 13.70 V @ 126.32 kHz
# HF antenna: 0.13 V @ 13.56 MHz
# Your HF antenna is unusable.
proxmark3> lf em4x em410xwatch
#db# buffer samples: 00 00 00 00 00 00 00 c5 ...
Reading 2000 samples
Done!
Auto-detected clock rate: 64
Thought we had a valid tag but failed at word 3 (i=29)
Thought we had a valid tag but failed at word 3 (i=93)
EM410x Tag ID: 0500XXXXXX
proxmark3>
------------------------------------------------------------------------------
// And here I connected HF antenna and tried to identify a Mifare card:
------------------------------------------------------------------------------
$ ./client/proxmark3.exe
Connected units:
1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
proxmark3> hw tune
#db# Measuring antenna characteristics, please wait.
# LF antenna: 0.00 V @ 125.00 kHz
# LF antenna: 0.00 V @ 134.00 kHz
# LF optimal: 0.00 V @ 12000.00 kHz
# HF antenna: 9.05 V @ 13.56 MHz
# Your LF antenna is unusable.
proxmark3> hf 14a reader
ATQA : 04 00
UID : XX XX XX XX 00 00 00 00 XX XX XX XX
SAK : 08 [2]
SAK : NXP MIFARE CLASSIC 1k | Plus 2k
proprietary non-iso14443a card found, RATS not supported
proxmark3> hf mf rdsc 0 A FFFFFFFFFFFF
--sector no:00 key type:00 key:ff ff ff ff ff ff
#db# READ SECTOR FINISHED
isOk:01
data:XX XX XX XX XX XX XX XX 62 63 64 65 66 67 68 69
data:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
data:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
data:00 00 00 00 00 00 XX XX XX XX ff ff ff ff ff ff
------------------------------------------------------------------------------
Photo of all items together:
full image: http://imgur.com/lBJmz
Photo of the board:
Soldering quality is OK. (A little flux left near IC5, but still OK)
full image: http://imgur.com/21uW9
Hi,
I'm looking to work with 125kHz cards predominantly but took the plunge and bought a Proxmark3, both LF and HF antennae, usb & hirose cables and some blank T55x7 cards from this seller via http://www.xfpga.com.
DHL delivery took only a few days to Mexico - seller kept in email contact throughout. Customs checked the contents but didn't levy any fees or duty.
Everything's working well. Here's a picture of the LF antenna and the Proxmark3 (sitting atop one of the blank cards to show the scale):
A full resolution version of the above image is here (to give anyone interested an idea of the quality of the construction): http://i.imgbox.com/abllTxgd.jpg
Now to get to grips with the source code...
Dear Laser, i followed the link posted on your first post of this thread with the price.
Could you please contact me with a quotation (in euro currency) for the following:
-Quantity 1 proxmark3
-Quantity 1 HF antenna
-Quantity 1 LF antenna
-cables
-shipping cost to Italy (italian postal code 00100)
Thank you.
Regards.
Gaucho
Last edited by gaucho (2013-05-02 15:28:16)
hi laser,
i am new here at the forum and i like to buy a complete set of the pm3.
proxmark3; hf antenna; lf antenna; usb cables; tags and shipping costs. stuff need to be sent to germany. i like to know if i can pay via paypal.
would you please contact me asap?
thanks a lot in advance.
best regards
oliver
Hi all
Last week I bought the proxmark board + antennas + blank cards + usb & hirose cable from this seller Laser, via http://www.xfpga.com/.
Contact and delivery was very fast. Everything worked well. I just had to clone 1 Indala card and now I'm selling it again.
Who is interested?
Hi gaucho
I paid $203 for all the equipment, excl. shipping and customs cost.
Willing to sell it for €120 excl shipping cost. OK for you?
which is the price, shipping excluded? (supposed that the shipping cost is less than 10€)
Hi Asper
Yes correct, 1 antenna (not -s). Everything I have/sell is in that picture.
Hi smartens, you said "antennas" but in the picture there is only 1 antenna (LF)... is this correct ? No HF antenna ?
Hi Gaucho,
Thank you for your help ...
Do you still have the possibility to sell proxmark 3 device as mentionned in the post ? I've miss the opportunity but i'm very interested in buying such a a device.
I'm also interesred in cards and hirose connectors.
Thank you very much for your help
Have a nice day