Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.

"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 09:39:49


Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2023-04-05 19:00:09

Registered: 2022-02-19
Posts: 16

How can i get a 26 bit out put during lf simulation .


I was trying to emulate  some data in proxmark3  by passing raw data through below command .

"lf hid sim -r 1234"  as a result i am getting a big number as the output which is  "00000000004660"

Can you please let me know how can i control the length of the output to 26 bit rather than such a big number .

I would like to use the above command is it possible , please let me know .



#2 2023-06-23 17:14:55

Registered: 2023-02-15
Posts: 5

Re: How can i get a 26 bit out put during lf simulation .

1234 in hex = 4660 in decimal.
Type you wanted big number into any dec2hex converter and pass the result to the "lf hid sim -r _______". It will be no more than 7 digits.


Quick reply

Write your message and submit

Board footer

Powered by FluxBB