Proxmark3 community

zantzue

Contributor

Registered: 2018-12-13

Posts: 38

New cards on Aliexpress (changeable 7-byte UID S20 cards)

Hi, guys. I just wanted you to know I found (well, in fact, someone else told me) these cards on aliexpress. As far as I know, that is the only seller that sells them on aliexpress. I've purchased a bunch and they will arrive in 2-3 weeks. I would like to clone DI toys. I have a base emulator but I want to win this battle (I tried to clone DI figures many years ago without success). This is the software needed. The password is "piswordss20" and we need an acr122u to use it. I know this is a pm3 related forum but Iceman may be interested in those cards, in case he doesn't already know them.

iceman

Administrator

Registered: 2013-04-25

Posts: 9,468

Website

Re: New cards on Aliexpress (changeable 7-byte UID S20 cards)

Cool,   S20 cards I havent seen,   but then,   you should be able to use a S50 card with the right block0 and trick the reader.  No need for special software etc.

zantzue

Contributor

Registered: 2018-12-13

Posts: 38

Re: New cards on Aliexpress (changeable 7-byte UID S20 cards)

I have a 7-byte UID S50 card and I cloned a character (McQueen) onto it. The first 5 sectors, block 0 included, are identical to the dump from my original figure but the base doesn't like it. If I place the original one and replace it with the clone very fast, the character doesn't dissapear on screen. But if I wait until the character dissapears and then place the clone on the base, the game doesn't recognize it. It seems to me that the base expects a 7-byte UID S20 chip (ATQA=4400 & SAK=09) that's why I bought some S20 cards.

Last edited by zantzue (2023-01-15 08:00:31)

rbm78bln

Contributor

From: Berlin, Germany

Registered: 2020-09-18

Posts: 2

Email

Re: New cards on Aliexpress (changeable 7-byte UID S20 cards)

Hi zantzue,

I don't have much to add, but the vendor you're pointing out on AE is always worth taking a closer look at. They're often hell of expensive, but also they're selling almost everything when it comes to RFID stuff. When you hardly couldn't find ntag-clones anywhere they already sold them for 10 bucks each...

Cheers
Ralf

zantzue

Contributor

Registered: 2018-12-13

Posts: 38

Re: New cards on Aliexpress (changeable 7-byte UID S20 cards)

The S20 cards arrived today. Five years later I could make proper clones; they work in game.

Old Tron

Contributor

Registered: 2023-01-10

Posts: 2

Email

Re: New cards on Aliexpress (changeable 7-byte UID S20 cards)

Interested on if it worked before I order some. My youngest is autistic and plays all the time but the characters are starting to fail one by one. I have 2 boxes i would like to backup before they don't function. Any updates on success.

zantzue

Contributor

Registered: 2018-12-13

Posts: 38

Re: New cards on Aliexpress (changeable 7-byte UID S20 cards)

@Old Tron I sent you an email... weeks ago? There is something called Project D.I.R.E. It is a Disney Infinity base emulator. If you have basic soldering skills, you could make one. By the way I found this on AE. Does anybody know where those tags can be bought? I mean, without the character or the coin holder.

Last edited by zantzue (2023-03-18 08:07:22)

BarTender

Contributor

Registered: 2023-03-26

Posts: 2

Re: New cards on Aliexpress (changeable 7-byte UID S20 cards)

I have successfully used a flipper zero and a Proxmark 3 Easy on the game pad with cloned characters. I was wondering if you managed to get the powerup tags and characters to work with two cards? That in theory should work but I have never had any success with that using the PM3 and Flipper.

WingofFreedom

Contributor

Registered: 2023-03-18

Posts: 3

Email

Re: New cards on Aliexpress (changeable 7-byte UID S20 cards)

I’m trying to clone a power dick using the acr122u reader and S20 7-byte cards.

However, while trying to reset Block 0 using the PCSC_Mifare program, when I hit RESET, I get an error saying “ACR122U Set Picc Para Cmd fail!”

Also, in the ATQA field, it says "SDI011 Reader support only."  Additionally, in the SAK field it says "SDI011 Reader support only."  Does anyone have any thoughts as to why I would see these errors?

WingofFreedom

Contributor

Registered: 2023-03-18

Posts: 3

Email

Re: New cards on Aliexpress (changeable 7-byte UID S20 cards)

@zantzue were you successful in making a clone that could work in the game with the S20 cards? 

Do you think these DI tags from AE could be overwritten with the ACR122U to be used for any figure or disc?