Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.

"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42


Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2022-12-20 18:49:00

Registered: 2022-10-29
Posts: 2

After a few years of use I think she's dead.

I've had my RDV4 for a while now and have gotten a lot of use out of it. Recently, for some reason the charging LED no longer lights up, nor does the blueshark Bluetooth led. When I try connecting to the proxmark it fails, I was oddly able to flash firmware onto the device, but same failed connection issue when launching the client.

Running dmesg shows that my computer is able to see the device, but it recognizes it as some USB generic.

Do I just need to replace the blueshark module or is it time to look into either building a new proxmark or purchasing one?


#2 2022-12-23 19:30:28

Registered: 2013-04-25
Posts: 9,468

Re: After a few years of use I think she's dead.

Could be the battery in the blueshark,   Does your pm3 work without it using usb cable?


Quick reply

Write your message and submit

Board footer

Powered by FluxBB