Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

Pages: 1

Post reply

#1 2022-09-08 09:02:57

mbzadegan
Contributor
Registered: 2022-08-15
Posts: 20

Next step in cloning Mifare mini

Hi there,

I'm trying to copy my Mifare card.


[usb] pm3 --> hf search
[|] Searching for ISO14443-A tag...
[+]  UID: B3 B8 18 64
[+] ATQA: 00 04
[+]  SAK: 09 [2]
[+] Possible types:
[+]    MIFARE Mini 0.3K
[=] proprietary non iso14443-4 card found, RATS not supported


[+] Valid ISO 14443-A tag found

I found that it is Mifare mini.

[usb] pm3 --> hf mf chk --mini -k FFFFFFFFFFFF
[=] [ 0] key FF FF FF FF FF FF
[=] Start check for keys...
[=] ...........
[=] time in checkkeys 2 seconds

[=] testing to read key B...
[=] Sector: 0, First block: 0, Last block: 3, Num of blocks: 4
[=] Reading sector trailer
[=] Sector: 2, First block: 8, Last block: 11, Num of blocks: 4
[=] Reading sector trailer

[+] found keys:

[+] -----+-----+--------------+---+--------------+----
[+]  Sec | Blk | key A        |res| key B        |res
[+] -----+-----+--------------+---+--------------+----
[+]  000 | 003 | A0A1A2A3A4A5 | 1 | ------------ | 0
[+]  001 | 007 | ------------ | 0 | ------------ | 0
[+]  002 | 011 | A0A1A2A3A4A5 | 1 | ------------ | 0
[+]  003 | 015 | FFFFFFFFFFFF | 1 | FFFFFFFFFFFF | 1
[+]  004 | 019 | FFFFFFFFFFFF | 1 | FFFFFFFFFFFF | 1
[+] -----+-----+--------------+---+--------------+----
[+] ( 0:Failed / 1:Success )

Now, I found this key: A0A1A2A3A4A5
What script should I run in my next step?

Offline

#2 2022-09-09 01:29:36

mbzadegan
Contributor
Registered: 2022-08-15
Posts: 20

Re: Next step in cloning Mifare mini

I have tested this command as well, but still I have a problem!

[usb] pm3 --> hf mf nested --blk 0 -a -k A0A1A2A3A4A5
[+] Testing known keys. Sector count 16
[=] ...
[=] Chunk 6.5s | found 6/32 keys (43)
[+] Time to check 42 known keys: 7 seconds

[+] enter nested key recovery
[-] Tag isn't vulnerable to Nested Attack (PRNG is not predictable).

[usb] pm3 -->

Then I try Hardnested:

[usb] pm3 --> hf mf hardnested --blk 0 -a -k A0A1A2A3A4A5
[=] Target block no   0, target key type: A, known target key: 000000000000 (not set)
[=] File action: none, Slow: No, Tests: 0
[=] Hardnested attack starting...
[=] ---------+---------+---------------------------------------------------------+-----------------+-------
[=]          |         |                                                         | Expected to brute force
[=]  Time    | #nonces | Activity                                                | #states         | time
[=] ---------+---------+---------------------------------------------------------+-----------------+-------
[=]        0 |       0 | Start using 8 threads and AVX2 SIMD core                |                 |
[=]        0 |       0 | Brute force benchmark: 923 million (2^29.8) keys/s      | 140737488355328 |    2d
[=]        7 |       0 | Using 235 precalculated bitflip state tables            | 140737488355328 |    2d
[=]       11 |     112 | Apply bit flip properties                               |     47314325504 |   51s
[=]       12 |     224 | Apply bit flip properties                               |      5145465344 |    6s
[=]       13 |     335 | Apply bit flip properties                               |      2985049856 |    3s
[=]       14 |     447 | Apply bit flip properties                               |      1745006976 |    2s
[=]       15 |     558 | Apply bit flip properties                               |      1247843200 |    1s
[=]       16 |     668 | Apply bit flip properties                               |      1247843200 |    1s
[=]       16 |     779 | Apply bit flip properties                               |      1247843200 |    1s
[=]       17 |     888 | Apply bit flip properties                               |      1247843200 |    1s
[=]       18 |     999 | Apply bit flip properties                               |      1247843200 |    1s
[=]       18 |    1110 | Apply bit flip properties                               |      1247843200 |    1s
[=]       20 |    1220 | Apply Sum property. Sum(a0) = 120                       |       346747264 |    0s
[=]       20 |    1220 | (Ignoring Sum(a8) properties)                           |       346747264 |    0s
[=]       23 |    1220 | Brute force phase completed.  Key found: A0A1A2A3A4A5   |               0 |    0s
[usb] pm3 -->

What should I do next?

Last edited by mbzadegan (2022-09-09 01:39:16)

Offline

#3 2022-09-09 17:43:52

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: Next step in cloning Mifare mini

Maybe you find something worth reading here, 
https://github.com/RfidResearchGroup/pr … eat-sheets
or
https://github.com/RfidResearchGroup/pr … atsheet.md

Offline

#4 2022-09-10 20:47:56

mbzadegan
Contributor
Registered: 2022-08-15
Posts: 20

Re: Next step in cloning Mifare mini

iceman wrote:

Thank you for your response.
Unfortunately, I could not find any resolve,
I think it is MIFARE mini card, Do you think there is no way to copy it?

Offline

#5 2022-09-11 04:49:21

mbzadegan
Contributor
Registered: 2022-08-15
Posts: 20

Re: Next step in cloning Mifare mini

I found these keys when I run [hf mf autopwn]:

[+] found keys:

[+] -----+-----+--------------+---+--------------+----
[+]  Sec | Blk | key A        |res| key B        |res
[+] -----+-----+--------------+---+--------------+----
[+]  000 | 003 | A0A1A2A3A4A5 | D | 0D258FE90296 | H
[+]  001 | 007 | 25DB1D129004 | H | D6DF72F055BF | H
[+]  002 | 011 | A0A1A2A3A4A5 | D | D6DF72F055BF | R
[+]  003 | 015 | FFFFFFFFFFFF | D | FFFFFFFFFFFF | D
[+]  004 | 019 | FFFFFFFFFFFF | D | FFFFFFFFFFFF | D
[+]  005 | 023 | 5C8FF9990DA2 | H | D01AFEEB890A | H
[+]  006 | 027 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+]  007 | 031 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+]  008 | 035 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+]  009 | 039 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+]  010 | 043 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+]  011 | 047 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+]  012 | 051 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+]  013 | 055 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+]  014 | 059 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+]  015 | 063 | 5C8FF9990DA2 | R | D01AFEEB890A | R
[+] -----+-----+--------------+---+--------------+----
[=] ( D:Dictionary / S:darkSide / U:User / R:Reused / N:Nested / H:Hardnested / C:statiCnested / A:keyA  )
[?] MAD key detected. Try `hf mf mad` for more details


[+] Generating binary key file
[+] Found keys have been dumped to hf-mf-B3B81864-key-6.bin
[=] FYI! --> 0xFFFFFFFFFFFF <-- has been inserted for unknown keys where res is 0
[+] transferring keys to simulator memory (Cmd Error: 04 can occur)
[#] Cmd Error 04
[#] wrong response len 0 (expected 18)
[#] wrong response len 0 (expected 18)
[#] wrong response len 0 (expected 18)
[=] fast dump reported back failure w KEY A,  swapping to KEY B
[#] Cmd Error 04
[#] wrong response len 0 (expected 18)
[#] wrong response len 0 (expected 18)
[#] wrong response len 0 (expected 18)
[=] fast dump reported back failure w KEY B
[=] Dump file is PARTIAL complete
[=] downloading the card content from emulator memory
[+] saved 1024 bytes to binary file hf-mf-B3B81864-dump-10.bin
[+] saved 64 blocks to text file hf-mf-B3B81864-dump-9.eml
[+] saved to json file hf-mf-B3B81864-dump-9.json
[=] autopwn execution time: 166 seconds
[usb] pm3 -->

What is my next step to copy this Mifare card?

Offline

#6 2022-09-11 09:35:26

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: Next step in cloning Mifare mini

If you read the help texts for the commands you are running,  you will find that it defaults to 1K cards...

Offline

#7 2022-09-11 18:16:31

mbzadegan
Contributor
Registered: 2022-08-15
Posts: 20

Re: Next step in cloning Mifare mini

iceman wrote:

If you read the help texts for the commands you are running,  you will find that it defaults to 1K cards...

Aha!, Thank you so much for your reminder!

I run "hf mf autopwn --mini" and finally got these information without error.


[usb] pm3 --> hf mf autopwn --mini
[!] no known key was supplied, key recovery might fail
[+] loaded 42 keys from hardcoded default array
[=] running strategy 1
[=] Chunk 1.2s | found 6/10 keys (42)
[=] running strategy 2
[=] Chunk 1.2s | found 6/10 keys (42)
[+] target sector   0 key type A -- found valid key [ A0A1A2A3A4A5 ] (used for nested / hardnested attack)
[+] target sector   2 key type A -- found valid key [ A0A1A2A3A4A5 ]
[+] target sector   3 key type A -- found valid key [ FFFFFFFFFFFF ]
[+] target sector   3 key type B -- found valid key [ FFFFFFFFFFFF ]
[+] target sector   4 key type A -- found valid key [ FFFFFFFFFFFF ]
[+] target sector   4 key type B -- found valid key [ FFFFFFFFFFFF ]
[=] Hardnested attack starting...
[=] ---------+---------+---------------------------------------------------------+-----------------+-------
[=]          |         |                                                         | Expected to brute force
[=]  Time    | #nonces | Activity                                                | #states         | time
[=] ---------+---------+---------------------------------------------------------+-----------------+-------
[=]        0 |       0 | Start using 8 threads and AVX2 SIMD core                |                 |
[=]        0 |       0 | Brute force benchmark: 768 million (2^29.5) keys/s      | 140737488355328 |    2d
[=]       10 |       0 | Using 235 precalculated bitflip state tables            | 140737488355328 |    2d
[=]       14 |     112 | Apply bit flip properties                               |     35840151552 |   47s
[=]       15 |     224 | Apply bit flip properties                               |     10151162880 |   13s
[=]       16 |     336 | Apply bit flip properties                               |      7335602688 |   10s
[=]       17 |     447 | Apply bit flip properties                               |      6678748160 |    9s
[=]       18 |     557 | Apply bit flip properties                               |      6678748160 |    9s
[=]       19 |     667 | Apply bit flip properties                               |      6678748160 |    9s
[=]       20 |     772 | Apply bit flip properties                               |      6394606080 |    8s
[=]       20 |     882 | Apply bit flip properties                               |      6394606080 |    8s
[=]       21 |     994 | Apply bit flip properties                               |      6394606080 |    8s
[=]       22 |    1103 | Apply bit flip properties                               |      6394606080 |    8s
[=]       22 |    1214 | Apply bit flip properties                               |      6394606080 |    8s
[=]       23 |    1325 | Apply bit flip properties                               |      6394606080 |    8s
[=]       24 |    1432 | Apply bit flip properties                               |      6394606080 |    8s
[=]       25 |    1541 | Apply bit flip properties                               |      6394606080 |    8s
[=]       26 |    1649 | Apply bit flip properties                               |      6394606080 |    8s
[=]       27 |    1756 | Apply bit flip properties                               |      6394606080 |    8s
[=]       28 |    1865 | Apply bit flip properties                               |      6394606080 |    8s
[=]       30 |    1976 | Apply Sum property. Sum(a0) = 128                       |       282340928 |    0s
[=]       30 |    2085 | Apply bit flip properties                               |       282340928 |    0s
[=]       31 |    2195 | Apply bit flip properties                               |       282340928 |    0s
[=]       32 |    2305 | Apply bit flip properties                               |       282340928 |    0s
[=]       33 |    2305 | (Ignoring Sum(a8) properties)                           |       282340928 |    0s
[=]       34 |    2305 | Brute force phase completed.  Key found: 0D258FE90296   |               0 |    0s
[+] target sector   0 key type B -- found valid key [ 0D258FE90296 ]
[=] Hardnested attack starting...
[=] ---------+---------+---------------------------------------------------------+-----------------+-------
[=]          |         |                                                         | Expected to brute force
[=]  Time    | #nonces | Activity                                                | #states         | time
[=] ---------+---------+---------------------------------------------------------+-----------------+-------
[=]        0 |       0 | Start using 8 threads and AVX2 SIMD core                |                 |
[=]        0 |       0 | Brute force benchmark: 909 million (2^29.8) keys/s      | 140737488355328 |    2d
[=]        6 |       0 | Using 235 precalculated bitflip state tables            | 140737488355328 |    2d
[=]       10 |     112 | Apply bit flip properties                               |   4011938545664 | 74min
[=]       11 |     223 | Apply bit flip properties                               |   2245112102912 | 41min
[=]       12 |     335 | Apply bit flip properties                               |   2161078960128 | 40min
[=]       13 |     447 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       14 |     557 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       15 |     668 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       16 |     778 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       16 |     889 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       17 |     998 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       18 |    1106 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       19 |    1216 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       20 |    1327 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       20 |    1438 | Apply bit flip properties                               |   2127205761024 | 39min
[=]       23 |    1547 | Apply Sum property. Sum(a0) = 128                       |    125849157632 |  2min
[=]       23 |    1654 | Apply bit flip properties                               |    125849157632 |  2min
[=]       24 |    1765 | Apply bit flip properties                               |    125849157632 |  2min
[=]       25 |    1875 | Apply bit flip properties                               |     85512159232 |  2min
[=]       26 |    1984 | Apply bit flip properties                               |     85512159232 |  2min
[=]       26 |    2093 | Apply bit flip properties                               |     37412089856 |   41s
[=]       27 |    2204 | Apply bit flip properties                               |     85512159232 |  2min
[=]       28 |    2313 | Apply bit flip properties                               |     85512159232 |  2min
[=]       29 |    2424 | Apply bit flip properties                               |     59237195776 |   65s
[=]       30 |    2531 | Apply bit flip properties                               |     59237195776 |   65s
[=]       31 |    2639 | Apply bit flip properties                               |     95621865472 |  2min
[=]       32 |    2746 | Apply bit flip properties                               |     95621865472 |  2min
[=]       33 |    2854 | Apply bit flip properties                               |     95621865472 |  2min
[=]       33 |    2963 | Apply bit flip properties                               |     95621865472 |  2min
[=]       34 |    2963 | (1. guess: Sum(a8) = 0)                                 |     95621865472 |  2min
[=]       34 |    2963 | Apply Sum(a8) and all bytes bitflip properties          |     95621865472 |  2min
[=]       34 |    2963 | (2. guess: Sum(a8) = 64)                                |    320054394880 |  6min
[=]       35 |    2963 | Apply Sum(a8) and all bytes bitflip properties          |    293785108480 |  5min
[=]       36 |    2963 | Brute force phase completed.  Key found: 25DB1D129004   |               0 |    0s
[+] target sector   1 key type A -- found valid key [ 25DB1D129004 ]
[=] Hardnested attack starting...
[=] ---------+---------+---------------------------------------------------------+-----------------+-------
[=]          |         |                                                         | Expected to brute force
[=]  Time    | #nonces | Activity                                                | #states         | time
[=] ---------+---------+---------------------------------------------------------+-----------------+-------
[=]        0 |       0 | Start using 8 threads and AVX2 SIMD core                |                 |
[=]        0 |       0 | Brute force benchmark: 821 million (2^29.6) keys/s      | 140737488355328 |    2d
[=]        5 |       0 | Using 235 precalculated bitflip state tables            | 140737488355328 |    2d
[=]        9 |     112 | Apply bit flip properties                               |    188968124416 |  4min
[=]       10 |     224 | Apply bit flip properties                               |    117209038848 |  2min
[=]       11 |     334 | Apply bit flip properties                               |     93525139456 |  2min
[=]       12 |     446 | Apply bit flip properties                               |     92831907840 |  2min
[=]       13 |     554 | Apply bit flip properties                               |     92831907840 |  2min
[=]       14 |     665 | Apply bit flip properties                               |     92831907840 |  2min
[=]       14 |     775 | Apply bit flip properties                               |     91839938560 |  2min
[=]       15 |     885 | Apply bit flip properties                               |     91839938560 |  2min
[=]       16 |     996 | Apply bit flip properties                               |     91839938560 |  2min
[=]       17 |    1107 | Apply bit flip properties                               |     91839938560 |  2min
[=]       18 |    1219 | Apply bit flip properties                               |     91839938560 |  2min
[=]       18 |    1330 | Apply bit flip properties                               |     91839938560 |  2min
[=]       19 |    1440 | Apply bit flip properties                               |     91839938560 |  2min
[=]       20 |    1551 | Apply bit flip properties                               |     91839938560 |  2min
[=]       21 |    1660 | Apply bit flip properties                               |     91839938560 |  2min
[=]       22 |    1771 | Apply bit flip properties                               |     91839938560 |  2min
[=]       24 |    1881 | Apply Sum property. Sum(a0) = 64                        |       858644160 |    1s
[=]       24 |    1991 | Apply bit flip properties                               |       858644160 |    1s
[=]       25 |    2097 | Apply bit flip properties                               |       858644160 |    1s
[=]       26 |    2206 | Apply bit flip properties                               |       807506176 |    1s
[=]       27 |    2206 | (1. guess: Sum(a8) = 256)                               |       807506176 |    1s
[=]       27 |    2206 | Apply Sum(a8) and all bytes bitflip properties          |       172694864 |    0s
[=]       27 |    2206 | Brute force phase completed.  Key found: D6DF72F055BF   |               0 |    0s
[+] target sector   1 key type B -- found valid key [ D6DF72F055BF ]
[+] target sector   2 key type B -- found valid key [ D6DF72F055BF ]

[+] found keys:

[+] -----+-----+--------------+---+--------------+----
[+]  Sec | Blk | key A        |res| key B        |res
[+] -----+-----+--------------+---+--------------+----
[+]  000 | 003 | A0A1A2A3A4A5 | D | 0D258FE90296 | H
[+]  001 | 007 | 25DB1D129004 | H | D6DF72F055BF | H
[+]  002 | 011 | A0A1A2A3A4A5 | D | D6DF72F055BF | R
[+]  003 | 015 | FFFFFFFFFFFF | D | FFFFFFFFFFFF | D
[+]  004 | 019 | FFFFFFFFFFFF | D | FFFFFFFFFFFF | D
[+] -----+-----+--------------+---+--------------+----
[=] ( D:Dictionary / S:darkSide / U:User / R:Reused / N:Nested / H:Hardnested / C:statiCnested / A:keyA  )
[?] MAD key detected. Try `hf mf mad` for more details


[+] Generating binary key file
[+] Found keys have been dumped to hf-mf-B3B81864-key-7.bin
[=] FYI! --> 0xFFFFFFFFFFFF <-- has been inserted for unknown keys where res is 0
[+] transferring keys to simulator memory (Cmd Error: 04 can occur)
[=] downloading the card content from emulator memory
[+] saved 320 bytes to binary file hf-mf-B3B81864-dump-11.bin
[+] saved 20 blocks to text file hf-mf-B3B81864-dump-10.eml
[+] saved to json file hf-mf-B3B81864-dump-10.json
[=] autopwn execution time: 103 seconds

After that I run "[usb] pm3 --> hf mf restore --mini --uid B3B81864 -k hf-mf-B3B81864-key-7.bin -f hf-mf-B3B81864-dump-11.bin"

But, I got these errors!!

[usb] pm3 --> hf mf restore --mini --uid B3B81864 -k hf-mf-B3B81864-key-7.bin -f hf-mf-B3B81864-dump-11.bin
[+] loaded 320 bytes from binary file hf-mf-B3B81864-dump-11.bin
[=] Restoring hf-mf-B3B81864-dump-11.bin to card
[=] block   0: B3 B8 18 64 77 89 04 00 C8 46 00 20 00 00 00 15
[#] Auth error
[=] Writing to manufacture block w key B ( fail )
[=] block   1: 6F 01 51 90 51 90 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[-] Write to block 1 w key B ( fail )
[=] block   2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[-] Write to block 2 w key B ( fail )
[=] block   3: A0 A1 A2 A3 A4 A5 78 77 88 C1 0D 25 8F E9 02 96
[#] Auth error
[-] Write to block 3 w key B ( fail )
[=] block   4: 45 32 31 75 5B 37 48 CA 15 B6 9B 6A C3 93 DC 32
[#] Auth error
[=] Writing to manufacture block w key B ( fail )
[=] block   5: 4C 00 1B DA 25 EF 90 B1 B0 27 29 27 8B EC EB 5E
[#] Auth error
[-] Write to block 1 w key B ( fail )
[=] block   6: F8 66 BD C6 4E 3A A9 53 F1 74 16 DB BE ED 6F 06
[#] Auth error
[-] Write to block 2 w key B ( fail )
[=] block   7: 25 DB 1D 12 90 04 78 77 88 01 D6 DF 72 F0 55 BF
[#] Auth error
[-] Write to block 3 w key B ( fail )
[=] block   8: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[=] Writing to manufacture block w key B ( fail )
[=] block   9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[-] Write to block 1 w key B ( fail )
[=] block  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[-] Write to block 2 w key B ( fail )
[=] block  11: A0 A1 A2 A3 A4 A5 78 77 88 05 D6 DF 72 F0 55 BF
[#] Auth error
[-] Write to block 3 w key B ( fail )
[=] block  12: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[=] Writing to manufacture block w key B ( fail )
[=] block  13: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[-] Write to block 1 w key B ( fail )
[=] block  14: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[-] Write to block 2 w key B ( fail )
[=] block  15: FF FF FF FF FF FF FF 07 80 69 FF FF FF FF FF FF
[#] Auth error
[-] Write to block 3 w key B ( fail )
[=] block  16: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[=] Writing to manufacture block w key B ( fail )
[=] block  17: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[-] Write to block 1 w key B ( fail )
[=] block  18: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[#] Auth error
[-] Write to block 2 w key B ( fail )
[=] block  19: FF FF FF FF FF FF FF 07 80 69 FF FF FF FF FF FF
[#] Auth error
[-] Write to block 3 w key B ( fail )
[=] Done!
[usb] pm3 -->

So, what should I do in my second step?

Thanks again for your help.

Offline

#8 2022-09-11 20:41:11

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: Next step in cloning Mifare mini

... was the target card blank?   Since you instructed the client to use a key file

Offline

Pages: 1

Post reply

Quick reply

Write your message and submit

Board footer

Powered by FluxBB