Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2021-11-28 23:29:57
- diamondrail
- Contributor
- Registered: 2017-08-07
- Posts: 35
Gproxii commands in Proxmark3, RDV2 - not showing up
I am running this firmware on a Proxmark3, RDV2:
bootrom: master/v3.0.1-505-gd3c6065-suspect 2019-01-17 17:06:34
os: master/v3.1.0-150-gb41be3c-suspect 2019-10-21 20:53:03
When accessing 'help' for GproxII commands in the cmd prompt , I only see three options:
help
demod
read
I am trying to run a few commands for the Gproxii tags, such as:
lf gpr cl 36 30 3949 <--------------
Preparing to clone Guardall to T55x7 with Facility Code: 30, Card Number: 3949
Blk | Data
----+------------
00 | 0x00150060
01 | 0xF98C67B8
02 | 0xC6324C63
03 | 0x38CD0800
pm3 --> lf sea u
NOTE: some demods output possible binary
if it finds something that looks like a tag
False Positives ARE possible
Checking for known tags:
G-Prox-II Found: Format Len: 36bit - FC: 1920 - Card: 3947, Raw: f98c67b8c6324c6338cd0800
Valid Guardall G-Prox II ID Found!
---
Do I need to upgrade my Proxmark3 RDv2 or do I need an entirely different proxmark?
#2 2021-11-29 20:28:11
Re: Gproxii commands in Proxmark3, RDV2 - not showing up
you can try updating the firmware and client to latest version.
RRG/Iceman is usually a pleasant experience to fiddle with Proxmark3. You need to take in consideration to compile it for GENERIC support to fit your model.
#3 2021-11-30 21:36:16
- diamondrail
- Contributor
- Registered: 2017-08-07
- Posts: 35
Re: Gproxii commands in Proxmark3, RDV2 - not showing up
Iceman,
It's been awhile since I worked on proxmark3. See my screenshot of bootrom/os version for this RDv2.
Where can I find the latest files that will work for proxmark3 RDv2?
Also, is there a reason why the logfile is disabled?
Thanks!
#4 2021-11-30 21:55:42
- diamondrail
- Contributor
- Registered: 2017-08-07
- Posts: 35
Re: Gproxii commands in Proxmark3, RDV2 - not showing up
Iceman, found the link to the files at the top right and got the flash updated. Its working good now, looks different than my last version but working ;D.
Iceman, on another topic, how do I switch back to the the "colourless" version, the command inputs are different in this version that I am running, I am not used to these input/commands.
Last edited by diamondrail (2021-12-01 00:25:19)
#5 2021-12-01 07:34:26
Re: Gproxii commands in Proxmark3, RDV2 - not showing up
... if you want the old client, you need to get back to the official repository.
however, in the colorful version adding -h to the end of your command will bring you the help text.
You will find it easy to use when going from old school style.
#6 2021-12-01 17:53:26
- diamondrail
- Contributor
- Registered: 2017-08-07
- Posts: 35
Re: Gproxii commands in Proxmark3, RDV2 - not showing up
OK, thanks Iceman.