Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2021-08-14 19:13:27
- DzKmAn
- Contributor
- Registered: 2020-09-01
- Posts: 9
lf em 4x50 chk failed
hello everyone,
I have a problem when I launch the command lf em 4x50 chk
[usb] pm3 --> lf em 4x50 chk
[!] no flash memory available
[usb] pm3 --> lf em 4x50 chk -f my.dic
[!] no flash memory available
[usb] pm3 -->
can you help me
#4 2021-08-15 10:48:29
Re: lf em 4x50 chk failed
makes sense, you seem to be running fw/client compiled for RDV4, rather than the PM3GENERIC platform.
There are clear instructions on the RRG/Iceman repo how to resolve it. Or if you are using the pre-compiled binaries from proxmarkbuilds, select the right ones.