Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2021-06-17 10:24:05
- Zolorah
- Contributor
- Registered: 2021-04-16
- Posts: 9
Standalone module for recon
Hello all,
jrjgjk and I have started to work around the standalone modules and have developed a module for collecting data on nexwatch cards and logging identified cards into a file (rdv 4.0 needed).
We would like to add this module to the repository but we're not sure about the procedure we have to follow.
We are now trying to develop a global recon standalone module that could recognize any type of card scanned and log relevant data (a sort of standalone version of the 'auto' command).
Do you think it is possible ? Do you have any tips ? Also, is it possible to use code coming from client or can the standalone modules only access common ?
Thank y'all in advance 
#2 2021-06-19 17:15:00
Re: Standalone module for recon
Interesting!
Every contribution to the source code is always welcome.
The process of adding a new standalone mode is well documented in the RRG/Iceman repo. Scroll down to notes and you find one about standalone modes. Follow its instructions and make a PR.