Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2021-02-15 13:27:36

Bearit641
Contributor
Registered: 2021-02-01
Posts: 4

Cannot Read a 1K Mifare Cassic

Hi - Apologies for what may well be a stupid question - I am stuck in the noob zone!

I have the Proxmark up and running on Ubuntu.
Firmware is PM3RDV4
Client is:- RRG/Iceman/master/V4.9237-3053-gd8e39b19b

When I try a simple HF Search on an NXP MiFare Classic 1k - I get:-

No Known/supported 13.56 Mhz tags found.

If I HF Tune I can see the mV drop when the card is introduced

HW Status gives me
Anicol Override - std
BCC override - std
CL2 override - std
CL3 override - stdRATS override - standard

Only issues may be in VARIOUS with DBGLEVEL - 1 (ERROR)

I just want to copy a simple standard 1k card.... where am I going wrong?

Offline

#2 2021-02-15 22:33:24

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: Cannot Read a 1K Mifare Cassic

....  14a usually wants some distance between tag and antenna.  About 1-2cm,  I tend to use a post-it block.

Offline

#3 2021-02-15 22:48:10

Bearit641
Contributor
Registered: 2021-02-01
Posts: 4

Re: Cannot Read a 1K Mifare Cassic

Hey thanks but that doesn’t seem to fix it... if I do a hf  14a info what would I expect to see as a return?

Last edited by Bearit641 (2021-02-15 22:55:45)

Offline

#4 2021-02-16 00:05:04

Bearit641
Contributor
Registered: 2021-02-01
Posts: 4

Re: Cannot Read a 1K Mifare Cassic

Is there a way to check that the Proxmark unit is properly functional? It appears to work. The TUNE command seems to give reasonable results, but I just cannot read a tag...if there a way to test if its me or the unit?

Offline

Quick reply

Write your message and submit

Board footer

Powered by FluxBB