Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
This copier locks T55 keys, standard passwords are not suitable for such copiers. I tried to hijack the password, but the key won't accept it. What am I doing wrong?
I was recording uid 1000000001, capture log:
[usb] pm3 --> lf t55 sniff --zero 7 --one 14
[#] LF Sampling config
[#] [q] divisor.............95 ( 125.00 kHz )
[#] [b] bits per sample.....8
[#] [d] decimation..........1
[#] [a] averaging...........Yes
[#] [t] trigger threshold...20
[#] [s] samples to skip.....110000
[#] LF Sampling Stack
[#] Max stack usage.........4080 / 8480 bytes
[#] Done, saved 42336 out of 0 seen samples at 8 bits/sample
[=] Reading 42335 bytes from device memory
[+] Data fetched
[=] Samples @ 8 bits/smpl, decimation 1:1
[=] T55xx command detection
[+] Downlink mode | password | Data | blk | page | 0 | 1 | raw
[+] ----------------------+----------+----------+-----+------+-----+-----+-------------------------------------------------------------------------------
[+] Default write | | FC0035E4 | 0 | 1 | 7 | 14 | 11111111100000000000011010111100100000
[+] Default Read | | | 3 | 0 | 7 | 14 | 101011
[+] Default Read | | | 6 | 1 | 7 | 14 | 110110
[+] Default Read | | | 4 | 0 | 7 | 14 | 100100
[+] Leading 0 pwd write | 28000000 | 00000E21 | 2 | 0 | 7 | 14 | 0101000101000000000000000000000000000000000000000000000000111000100001010
[+] Default Read | | | 4 | 0 | 7 | 14 | 101100
[+] Default Read | | | 0 | 0 | 7 | 14 | 100000
[+] Default Read | | | 3 | 0 | 7 | 14 | 101011
[+] Default Read | | | 6 | 1 | 7 | 14 | 110110
[+] -----------------------------------------------------------------------------------------------------------------------------------------------------