Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Dear community,
I have a to me unknown mifare classic at hand:
[usb] pm3 --> hf 14a info
[+] UID: *4 *5 *2 *2 ** *0 *0
[+] ATQA: 00 48
[+] SAK: 20 [1]
[+] MANUFACTURER: NXP Semiconductors Germany
[+] Possible types:
[+] MIFARE Plus EV1 2K/4K CL2 in SL3
[+] MIFARE Plus S 2K/4K CL2 in SL3
[+] MIFARE Plus X 2K/4K CL2 in SL3
[+] MIFARE Plus SE 1K CL2
[+] NTAG 4xx
[=] -------------------------- ATS --------------------------
[+] ATS: 0E 78 77 91 02 4D 54 43 4F 53 73 02 05 04 [ f1 00 ]
[=] 0e............... TL length is 14 bytes
[=] 78............ T0 TA1 is present, TB1 is present, TC1 is present, FSCI is 8 (FSC = 256)
[=] 77......... TA1 different divisors are supported, DR: [2, 4, 8], DS: [2, 4, 8]
[=] 91...... TB1 SFGI = 1 (SFGT = 8192/fc), FWI = 9 (FWT = 2097152/fc)
[=] 02... TC1 NAD is NOT supported, CID is supported
[=] -------------------- Historical bytes --------------------
00: 4d 54 43 4f 53 73 02 05 04 |MTCOSs...
Has anybody heard of that type? Is it possible to dump that card? I will try to get some sniffs in the next time.
Regards
JD.
Hey iceman,
thats 's the result of hf mfp info:
[!!] ? iso14443-4 framing error. Card send 0 must be a
[=] --- Fingerprint
[=] SAK: MIFARE Plus SL0/SL3 or MIFARE DESFire
[!!] ? iso14443-4 framing error. Card send 0 must be a
[=] Send copy to iceman of this command output!
[=] data: 00 00 00
[=] result: MIFARE Plus SL0/SL3
Does that mean that it 's a Desfire?
Best regards,
JD.