Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-10-15 04:27:27

caroncopys
Contributor
Registered: 2020-10-08
Posts: 3

Proxmark3rdv4 BT - blinking LED, no standalone mode

I have a proxmark3 rdv4 with the blue shark connected. The issues appear to happen with or without the blue shark connected. At one point everything appeared to work with the device before using the blue shark, but it had been a while since I used it. Ideally I would use the device with the Walrus app for red team engagements, however that no longer works now. The Walrus app sees the device but won't read any cards. When used in stand alone mode the leds do not display what I am use to seeing. For example the "D" led blinks. No cards appear to be read. When I connect via USB cable to my computer  and do a lf or hf search the proxmark will read cards. Have not been able to clone cards read but I think that is user error.

These may be all separate issues, probably starting with my lack of knowledge. But the issues I see are:

I can't use standalone mode.
I can no longer use the Walrus app
The LED lights do not line up with what Ive seen in the past such as the blinking "D" led.

Some of what I saw was:
when flashing A and C led are on
when done flashing all leds are off
hold button for ~2-3 seconds,  each led turns on and then off in a pattern then led A is solid and led D is blinking, no other options for the leds.

hw version - Kali Linux

[usb] pm3 --> hw version

[ Proxmark3 RFID instrument ]

[ CLIENT ]
  client: RRG/Iceman/master/v4.9237-1722-g6e6c8cbd-dirty...-unclean 2020-10-13 10:58:29
  compiled with GCC 9.3.0 OS:Linux ARCH:x86_64

[ PROXMARK3 ]
  firmware.........................PM3RDV4
  external flash...................present
  smartcard reader.................present
  FPC USART for BT add-on..........present

[ ARM ]
  bootrom: RRG/Iceman/master/v4.9237-1722-g6e6c8cbd-dirty...-unclean 2020-10-13 10:58:59
       os: RRG/Iceman/master/v4.9237-1722-g6e6c8cbd-dirty...-unclean 2020-10-13 10:59:15
  compiled with GCC 8.3.1 20190703 (release) [gcc-8-branch revision 273027]

[ FPGA ]
  LF image built for 2s30vq100 on 2020-07-08 at 23: 8: 7
  HF image built for 2s30vq100 on 2020-07-08 at 23: 8:19
  HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23: 8:30

[ Hardware ]
  --= uC: AT91SAM7S512 Rev B
  --= Embedded Processor: ARM7TDMI
  --= Nonvolatile Program Memory Size: 512K bytes, Used: 295560 bytes (56%) Free: 228728 bytes (44%)
  --= Second Nonvolatile Program Memory Size: None
  --= Internal SRAM Size: 64K bytes
  --= Architecture Identifier: AT91SAM7Sxx Series
  --= Nonvolatile Program Memory Type: Embedded Flash Memory

hw status

Smart card module (ISO 7816)
[#]   version.................v3.11

Offline

#2 2020-10-15 04:48:08

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: Proxmark3rdv4 BT - blinking LED, no standalone mode

Offline

#3 2020-10-15 05:39:54

caroncopys
Contributor
Registered: 2020-10-08
Posts: 3

Re: Proxmark3rdv4 BT - blinking LED, no standalone mode

Thank you for the assistance. I flashed an older version and removed the blue shark and the stand alone function works now. Is there a version I can use with the blue shark for stand alone?

Obviously it goes without saying I am new to this so again the assistance is much appreciated. I have an opportunity to use this on an engagement is a couple of months and for the first time I am actually trying to prep well ahead of time!

Thanks

Offline

#4 2020-10-15 06:30:51

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: Proxmark3rdv4 BT - blinking LED, no standalone mode

Like the issue says,  use the release version and compile how you want it

Offline

Quick reply

Write your message and submit

Board footer

Powered by FluxBB