Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I'm trying to trace the exchange between a cellphone app and the Proxmark simulating a tag. I run the sim command, it does stuff, seems to record a trace, but hf list doesnt show anything at all:
[usb] pm3 --> hf 14a sim t 7 u 11223344556677
[+] Emulating ISO/IEC 14443 type A tag with 7 byte UID (11 22 33 44 55 66 77 )
[=] Press pm3-button to abort simulation
[#] Emulator stopped. Trace length: 2961
[=] Done
[usb] pm3 -->
[usb] pm3 --> hf list 14a
[=] downloading tracelog from device
[+] Recorded activity (trace len = 2961 bytes)
[=] Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer
[=] ISO14443A - All times are in carrier periods (1/13.56MHz)
Start | End | Src | Data (! denotes parity error) | CRC | Annotation
------------+------------+-----+-------------------------------------------------------------------------+-----+--------------------
[usb] pm3 -->
Am I doing something wrong?
Not sure I understand your question.
Why does it work in the older release version, but not in the latest and greatest from the repo?
This is a bit inconvenient if I'm honest, because I need LF features in the latest versions in the repo. I don't really want to reflash the firmware each time I have to do some HF tracing. But yeah, at least it works for now.
Last edited by Rosco (2020-08-01 21:36:02)