Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hello,
It’s a french tag used at my work and i don’t knwo how to deal with…
nfc-list -v
nfc-list uses libnfc 1.7.1
NFC device: ACS / ACR122U PICC Interface opened
1 ISO14443A passive target(s) found:
ISO/IEC 14443A (106 kbps) target:
ATQA (SENS_RES): 00 04
* UID size: single
* bit frame anticollision supported
UID (NFCID1): 45 0a da d0
SAK (SEL_RES): 00
* Not compliant with ISO/IEC 14443-4
* Not compliant with ISO/IEC 18092
Fingerprinting based on MIFARE type Identification Procedure:
* SmartMX with MIFARE 1K emulation
Other possible matches based on ATQA & SAK values:
0 Felica (212 kbps) passive target(s) found.
0 Felica (424 kbps) passive target(s) found.
0 ISO14443B passive target(s) found.
0 ISO14443B' passive target(s) found.
0 ISO14443B-2 ST SRx passive target(s) found.
0 ISO14443B-2 ASK CTx passive target(s) found.
0 Jewel passive target(s) found.
nfc-mfclassic r a test.mfd
NFC reader: ACS / ACR122U PICC Interface opened
Warning: tag is probably not a MFC!
Found MIFARE Classic card:
ISO/IEC 14443A (106 kbps) target:
ATQA (SENS_RES): 00 04
UID (NFCID1): 45 0a da d0
SAK (SEL_RES): 00
mfoc -O test.dmp
mfoc: ERROR: only Mifare Classic is supported
Any idea ??
Thanks ...