Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi, Trying to clone a transponder key for a mate who just brought a Yamaha 650 motorcycle second hand. It only came with 1 key and he wants a spare before he looses his only key. Apparently they come with a red key and black key. The red key is to program the immobiliser to a new key, but he doesn't have it.
A locksmith has said it can get him a new key for $200. Anyone cloned one of theses chips? There are lots of blanks on ebay and even blank mc keys with these chips in.
Any help appreciated.
Jimmid
got this much:
proxmark3> lf read
#db# LF Sampling config:
#db# [q] divisor: 95
#db# bps: 8 ( post wants ? was found without a matching )
#db# [d] decimation: 1
#db# [a] averaging: 1
#db# [t] trigger threshold: 0
#db# Done, saved 40000 out of 40000 seen samples at 8 bits/sample
#db# buffer samples: 72 73 72 73 72 72 73 73 ...
Reading 39999 bytes from device memory
Data fetched
Samples @ 8 bits/smpl, decimation 1:1
Hi Iceman,
When I run lf data plot I get nothing, just scrolls the help commands. I couldn't compile the proxmark3 software, the clean all make all commands wouldn't work, so I just downloaded the latest pre compiled windows version I could find. Could that be the problem?
info:
C:\pm3-64\win64>proxmark3 COM7
Prox/RFID mark3 RFID instrument
bootrom: /-suspect 2015-11-19 10:08:02
os: /-suspect 2015-11-19 10:08:09
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at 9: 8: 8
uC: AT91SAM7S512 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 169916 bytes (32%). Free: 354372 bytes (68%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
I think this is pretty close to the model in the key.
Iceman, I am very new to this. Haven't played with Proxmark3 except for a few hours.
I don't mind putting the work into learning, but would you mind giving me a few pointers were to go from here?
I have seen that is supposed to be like a HITAG2 chip?
Thanks in advance
I followed the above commands, but the saved file only showed 0's
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
I see in the data sheet the following:
Memory size 80 bits
Memory organization 1 block
Identification data 64 bit
Error detection (Data BCC) CRC - CCITT , 16 bit
does that help read anything? can you read hitag2 cards?