Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hello.
When i try to sniff mifare card ,with «hf sniff» command ,and then
get result «hf list», always have same result, sample below.
Please telling me what I'm doing wrong?
[usb] pm3 --> hf search
[+] UID: 19 9E 22 48
[+] ATQA: 00 04
[+] SAK: 08 [2]
[+] POSSIBLE TYPE: MIFARE Classic 1K / Classic 1K CL2
[+] POSSIBLE TYPE: MIFARE Plus 2K / Plus EV1 2K
[+] POSSIBLE TYPE: MIFARE Plus CL2 2K / Plus CL2 EV1 2K
[=] proprietary non iso14443-4 card found, RATS not supported
[+] Prng detection: weak
[+] Static nonce: yes
[+] Valid ISO14443-A tag found
[usb] pm3 --> hf h
[usb] pm3 --> hf tune
[=] Measuring HF antenna, click pm3 button or press Enter to exit
[=] Done.
[usb] pm3 --> hf sniff
#db# Buffer cleared (40000 bytes)
#db# Skipping first 0 sample pairs, Skipping 0 triggers.
[usb] pm3 --> hf list
[=] downloading tracelog from device
#db# Trigger kicked! Value: 125, Dumping Samples Hispeed now.
#db# HF Sniffing end
[+] Recorded activity (trace len = 40000 bytes)
[=] Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer
[=] ISO14443A - All times are in carrier periods (1/13.56MHz)
Start | End | Src | Data (! denotes parity error) | CRC | Annotation
------------+------------+-----+-------------------------------------------------------------------------+-----+--------------------
0 | 32125 | Rdr |7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d | |
| | |7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d | |
| | |7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d | |
| | |7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d | |
| | |7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d | |
| | |7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d | |
| | |7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d | |
| | |7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d | |
| | |7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d | |
| | |7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d | |
| | |7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d | |
| | |7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d | |
| | |7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d | |
| | |7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d | |
| | |7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d | |
| | |7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d | |
| | |7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d | |
| | |7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d 7d 7d 7d! 7d 7d! 7d 7d 7d | !crc| Hello:
Not what is the purpose of Sniff. You want to get the keys from the card?.
"HF SNIFF" you should not sniff the card if it does not transfer data with the reader where this enabled the card. If only sniffas the card does not give any info.
If you want to get the keys you need other commands.