Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi today I tried one thin white card, it is from gallagher company
Not recognized by official fork, not lf not hf
With iceman fork, not hf, looks indala but no id or any other information, maybe wrong information
I think it is new type or something wrong with software. It is thin white card and only serial no on the dace
And gallagher.co domain, maybe from that company nz head office.
Anyone tried it? Nothing more to do
Hi, today I tried it again, same result. and failed, maybe
This case is same as another post :
http://www.proxmark.org/forum/viewtopic.php?id=5806
I do not know he succeeded or failed,
lf t5 detect
lf t5 config
lf t5 dump
then put blank t55
lf t5 write b 0 d xxxxxxxx
lf t5 write b 1 d xxxxxxxx
...
lf t5 write b 7 d xxxxxxxx
like him... but with written blank
lf t5 dump
totally different result not tried cloned one.
I captured hw tune and lf t5 detect, config, info... maybe no need for others, need? how can I attach dumped image or saved file?
Last edited by onebyte (2019-09-28 06:04:12)
@onebyte
for the simple text copy from the commands, you can just post here, but put between the (no spaces inside the square brackets)
use the preview to test
[ code ]
[ / code]
this should result in this example
[usb] pm3 --> lf t55 det
Chip Type : T55x7
Modulation : ASK
Bit Rate : 2 - RF/32
Inverted : No
Offset : 32
Seq. Term. : Yes
Block0 : 0x000880E0
Downlink Mode : default/fixed bit length
[usb] pm3 -->
For the trace files use an upload services and provide a link to the uploaded file.
You can use a free service to upload the files.
e.g. https://www.sendspace.com/
With no account the files have a limited life, but generally enough when working on this sort of thing.
then add a link (without the spaces in the tags)
[ url=https://www.sendspace.com/file/fileid]some name[/url ]
This is :
lf undefined
Thanks
ASK/MAN clk 32,
Autocorrelation of 3072, gives 12bytes of repeating data.
[usb] pm3 --> da detect a
[+] Auto-detected clock rate: 32, Best Starting Position: 29
[usb] pm3 --> data ra am
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
[usb] pm3 --> da print x
DemodBuffer:
0FFD5461 A9DA1346 B2D1AC32
0FFD5461 A9DA1346 B2D1AC32
0FFD5461 A9DA1346 B2D1AC32
0FFD5461 A9DA1346 B2D1AC32
0FFD5461 A9DA1346 B2D1AC32
0FFD5461
Do you have any printed number on your tag?