Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hey all.
I promise I tried searching the forums diligently for similar issues but came out with nothing. Please excuse me if this was discussed recently and I missed it and kindly point me in the right direction.
Just received my RDV4.01 from Hacker Warehouse and am trying to run it with the latest client. I tried compiling the latest version (don't want to flash or anything, just want to run it as is) to no avail, but that is not what I am here for as I am pretty sure I can eventually figure that part out when I have more time to dig through my steps and what I could possibly have done wrong.
I decided to go for the pre-compiled version just to test the device (got it from https://drive.google.com/drive/folders/1SyPB8t5Vo8O0Lh7PjNm3Kv-mO4BNbxjX), but I am unable to communicate with the proxmark for some reason. I get the following message:
"unknown command:: 0x61334d50[!!] ERROR: cannot communicate with the Proxmark"
My older RDV2 ran on COM3, the new 4.01 likes COM4.
Would highly appreciate the help.
Cheers
Last edited by wrench (2019-09-11 08:00:24)