Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#3 2019-06-12 19:18:17
Re: Iceman softwear
I have a proxmark rv2 that I bought 2 years ago from Elechouse, and never updated the firmware, I was good for my purpose.
But when I want to Read the mifare cards, ( Not All , Some) The proxmark "Can't authenticate to block"
When I saw your demonstration of RV4, You mentioned that you have added some keys, to the software,(using rdv4 flashmem for dictionary file)
can this be added To RV2, or I need Rv4 ?
or does This dictionary exist in Iceman1001 ?
Thank you
#5 2019-06-12 20:18:34
Re: Iceman softwear
Thank you for all your wisdom,
other question I have, using the keys, I have cracked all the Sectors on the cards, and created an eml. file, on proxmark,
But when I want to load the dump file into CUID, or Gen2 fobs,( Not to be Detectable By the reader) , I get the Massage of No being able to Authenticate as well.
Why is This?
I am in Canada, what site do you recommend for getting an RV4?
Cheers
#6 2019-06-13 16:13:03
Re: Iceman softwear
Try to keep one subject per forum thread. Its easier for everyone.
For your gen2, the message indicates you don't have the right key for writing to the tag.
You can order from anyone of the three distributors. Hackerwarehouse.com, Lab401.com, Sneaktechnology.com