Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi,
I own a Hitag1 and would like to use it with the RDV4. (i never noticed the hitag1 before)
But it doesn't recognize it.
pm3 --> hw tune (w/o card)
[=] measuring antenna characteristics, please wait...
....
[+] LF antenna: 72,94 V - 125.00 kHz
[+] LF antenna: 39,23 V - 134.00 kHz
[+] LF optimal: 72,94 V - 125,00 kHz
[+] LF antenna is OK
[+] HF antenna: 48,29 V - 13.56 MHz
[+] HF antenna is OK
pm3 --> hw tune (with Hitag1 Card)
[=] measuring antenna characteristics, please wait...
...
[+] LF antenna: 57,64 V - 125.00 kHz
[+] LF antenna: 46,03 V - 134.00 kHz
[+] LF optimal: 63,45 V - 127,66 kHz
[+] LF antenna is OK
[+] HF antenna: 40,93 V - 13.56 MHz
[+] HF antenna is OK
pm3 --> lf search u
NOTE: some demods output possible binary
if it finds something that looks like a tag
False Positives ARE possible
Checking for known tags:
[=] Signal looks just like noise. Looking for Hitag signal now.
[-] No Data Found! - maybe not an LF tag?
Has anyone ideas how to start with it?
Other lf works well:
pm3 --> lf search u
NOTE: some demods output possible binary
if it finds something that looks like a tag
False Positives ARE possible
Checking for known tags:
EM410x pattern found
EM TAG ID : 0000123456
Possible de-scramble patterns
Unique TAG ID : 0000482C6A
HoneyWell IdentKey {
DEZ 8 : 01193046
DEZ 10 : 0001193046
DEZ 5.5 : 00018.13398
DEZ 3.5A : 000.13398
DEZ 3.5B : 000.13398
DEZ 3.5C : 018.13398
DEZ 14/IK2 : 00000001193046
DEZ 15/IK3 : 000000004729962
DEZ 20/ZK : 00000000040802120610
}
Other : 13398_018_01193046
Pattern Paxton : 2519638 [0x267256]
Pattern 1 : 4739388 [0x48513C]
Pattern Sebury : 13398 18 1193046 [0x3456 0x12 0x123456]
[+] Valid EM410x ID Found!
Valid T55xx Chip Found
Try `lf t55xx` commands
Thanks a lot.
Last edited by Gtpy (2018-12-07 23:23:37)
That doesnt look like a Hitag.. Try the dedicated hitag commands?
We misunderstood each other.
I meant with the second part that other LF cards work.(was an T5577).
The other one, which is not recognized,
should definitely be a Hitag1 according to the manufacturer.
Any ideas on how I can best move forward with it?