Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2018-12-04 12:34:55
[RDV4] db unknown command: 0xd22d410d
Hi,
I am new to the topic Proxmark3.
What does the following message mean? This message appears from time to time when starting the client.
After exiting and restarting the client, it usually disappears.
#db# unknown command:: 0xd22d410d
Proxmark RDV4
pm3 --> hw version
Proxmark3 RFID instrument
[ CLIENT ]
client: iceman build for RDV40 with flashmem; smartcard;
[ ARM ]
bootrom: iceman/master/259dbadb 2018-12-02 10:56:33
os: iceman/master/259dbadb 2018-12-02 10:56:36
[ FPGA ]
LF image built for 2s30vq100 on 2018/ 9/ 8 at 13:57:51
HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23
[ Hardware ]
--= uC: AT91SAM7S512 Rev A
--= Embedded Processor: ARM7TDMI
--= Nonvolatile Program Memory Size: 512K bytes, Used: 241920 bytes (46%) Free: 282368 bytes (54%)
--= Second Nonvolatile Program Memory Size: None
--= Internal SRAM Size: 64K bytes
--= Architecture Identifier: AT91SAM7Sxx Series
--= Nonvolatile Program Memory Type: Embedded Flash Memory
pm3 --> hw status
#db# Memory
#db# BIGBUF_SIZE.............40000
#db# Available memory........40000
#db# Tracing
#db# tracing ................1
#db# traceLen ...............0
#db# Currently loaded FPGA image
#db# mode.................... HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23
#db# Flash memory
#db# Baudrate................24MHz
#db# Init....................OK
#db# Memory size.............2 mbits / 256kb
#db# Unique ID...............0xd567a882a70f7f26
#db# Smart card module (ISO 7816)
#db# version.................v2.06
#db# LF Sampling config
#db# [q] divisor.............95 (125 KHz)
#db# (b) bps.................8
#db# [d] decimation..........1
#db# [a] averaging...........Yes
#db# [t] trigger threshold...0
#db# LF T55XX config
#db# [a] startgap............29*8 (232)
#db# (b) writegap............17*8 (136)
#db# [c] write_0.............15*8 (120)
#db# [d] write_1.............47*8 (376)
#db# [e] readgap.............15*8 (120)
#db# USB Speed
#db# Sending USB packets to client...
#db# Time elapsed............1500ms
#db# Bytes transferred.......811520
#db# USB Transfer Speed PM3 -> Client = 541013 Bytes/s
#db# Various
#db# MF_DBGLEVEL.............1
#db# ToSendMax...............-1
#db# ToSendBit...............0
#db# ToSend BUFFERSIZE.......2308
#db# Installed StandAlone Mode
#db# LF HID26 standalone - aka SamyRun (Samy Kamkar)
pm3 --> hw tune
[=] measuring antenna characteristics, please wait...
....
[+] LF antenna: 73,08 V - 125.00 kHz
[+] LF antenna: 39,23 V - 134.00 kHz
[+] LF optimal: 73,08 V - 125,00 kHz
[+] LF antenna is OK
[+] HF antenna: 48,15 V - 13.56 MHz
[+] HF antenna is OK
[+] Displaying LF tuning graph. Divisor 89 is 134khz, 95 is 125khz.Thank you for your explanations.
Last edited by Gtpy (2018-12-04 21:23:43)
#4 2018-12-04 13:53:28
Re: [RDV4] db unknown command: 0xd22d410d
Recompiled, flashed again.
Now it looks fine.
Some problems with lf search and the T5577 card which was in the package.
But try again later and if it's needed I open a new topic.
Thanks. like the new RDV4 - great work.
#7 2018-12-04 22:43:58
Re: [RDV4] db unknown command: 0xd22d410d
hm... Open a issue on Github and fill in the details of OS etc, maybe a screen shot and lets see if others have this issue aswell
Issue is created: https://github.com/RfidResearchGroup/pr … /issues/66