Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2017-06-27 11:19:40
- platinium gsm
- Contributor
- Registered: 2016-08-06
- Posts: 28
last client doesnt work on windows 7?
Impossible to launch "proxmark client by el Gaucho de la livida palude"
exe failed when i launch but GO command ms dos works perfectly.
do i have to update my windows?
i run in last version:
rox/RFID mark3 RFID instrument
bootrom: master/v2.2.0-527-g6100040-suspect 2017-06-26 15:28:02
os: master/v2.2.0-527-g6100040-suspect 2017-06-26 15:28:07
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/05/17 at 17:48:26
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes. Used: 192561 bytes (73%). Free: 69583 bytes (27%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
What can i do?
#2 2017-06-29 13:24:01
- platinium gsm
- Contributor
- Registered: 2016-08-06
- Posts: 28
Re: last client doesnt work on windows 7?
why there is no gui program in your last compile iceman?
i know i can t use another one wi what can i do to have this easy windows interface?
#3 2017-06-29 13:28:33
Re: last client doesnt work on windows 7?
the Gaucho WindowGUI has never fully worked for icemanfork. Its because I have change in command names and change inputs.
It is however easy update the old settings.xml file in the GUI, to match. I don't use the GUI, hence no interest in updating the settings.xml file. Feel free to contribute with a updated settings.file.
The new remake of the GUI, the repository is called GauchGUI repo on GitHub. Its not finished.