Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I have flashed my Proxmark with bootrom SVN 344 an the newest FPGA and OS Image.
I am trying to read a Legic MIM 256 or MIM 1024 without success.
proxmark3> hf legic reader
#db# setting up legic card
#db# Unknown card format: 26
Always get the same "Unknown Card format" massage.
can anybody help me?
Thanks for your help.
Hey arcane1978, Just wondering, what OS are you using?
Just get the latest SVN from
http://proxmark3.googlecode.com/svn/trunk
0x26 is actually the obfuscation stream cipher, so that means that the card responded with 6 0 Bits. However these are not distinguishable from no answer at all, which is much more likely.
In short: your card is either no Legic-Card or your antenna is not strong enough.
Thank you very much for your reply.
You are right my antenna was the problem. Now it works fine reading the card.
Do you know how to simulate a card as well?