Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2016-11-03 16:52:50

phiber
Contributor
Registered: 2016-10-11
Posts: 37

help: Resetting T5577 card to default after i wrote it as a EM410x tag

I had a T5577 card which i tested and was able to code it into a HID, indala or viking using the PM3.
then i used a china multi-freq device (with the color lcd) and write it with 125khz mode while testing the device.

This is what the card shows now:

Reading 30000 bytes from device memory
Data fetched          
Samples @ 8 bits/smpl, decimation 1:1           
NOTE: some demods output possible binary
  if it finds something that looks like a tag          
False Positives ARE possible
Checking for known tags:
EM410x pattern found:           
EM TAG ID      : 0000030D40          
Unique TAG ID  : 0000C0B002          
Possible de-scramble patterns          
HoneyWell IdentKey {          
DEZ 8          : 00200000          
DEZ 10         : 0000200000          
DEZ 5.5        : 00003.03392          
DEZ 3.5A       : 000.03392          
DEZ 3.5B       : 000.03392          
DEZ 3.5C       : 003.03392          
DEZ 14/IK2     : 00000000200000          
DEZ 15/IK3     : 000000012627970          
DEZ 20/ZK      : 00000000120011000002          
}
Other          : 03392_003_00200000          
Pattern Paxton : 1526592 [0x174B40]          
Pattern 1      : 655686 [0xA0146]          
Pattern Sebury : 3392 3 200000  [0xD40 0x3 0x30D40]          
Valid EM410x ID Found!         

Now i can't use the tag as a HID or Indala or viking tag anymore as it seems to be "locked" to the em410x
how can i reset the card so that it can be used as a t5577 again?

Offline

#2 2016-11-03 17:03:00

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: help: Resetting T5577 card to default after i wrote it as a EM410x tag

those chinese cloners tools are known to set the password bit.
Search the forums for details.

Offline

#3 2016-11-07 17:17:29

Danz
Contributor
From: Dubai
Registered: 2015-10-24
Posts: 98

Re: help: Resetting T5577 card to default after i wrote it as a EM410x tag

you can try
lf t55 wr 00148040 00000000

but will break your card if locked by password as iceman said smile

Offline

Quick reply

Write your message and submit

Board footer

Powered by FluxBB