Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hello,
I just used my proxmark3 with version r834 for a week.
I got proxmark3 project from github,and added some logs on loacal computer. I used ProxSpace-130613 and builded armsrc. I found fullimage.elf/s19 in the folder: /armsrc/obj,but there was no rules to build osimage.elf/s19 in Makefile。So I can not get osimage.elf.
I ran Flash - FPGA fullimage.bat in pm3-bin-848\win32(clinet+GUI) to flash my fullimage.elf to the hardware. After doing that,I dettached and attached proxmark3 to PC with USB port,but my computer can not recognise it until I recoverd bootrom r848 by JTAG。
So My problems are:
What is the difference between fullimage.elf and osimage.elf+fpgaimage.elf?
When I modified my code in armsrc, how can I flash it to proxmark3. Just build fullimage.elf and flashing it?
It seens that bootrom was corrupted after I flashed my fullimage.elf,why?
iceman wrote:Please download and compile lastest sourcecode from GitHub, there you will need to flash bootrom first, then fullimage.
The latest is v2.2.0Thanks. I will have a try.
It was really worked!!!
I builded bootrom with latest devkitARM,used JTAG to flash bootrom.s19.
Then I flashed fullimage with flasher.exe.