Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
So many entries concerning firmware are qualified with stuff like "if you're running older firmware" or "most shipped boards come with this firmware..."
Can I get a quick rundown of how to see exactly what firmware my board is running before I start making any changes? I got it from a Chinese vendor that isn't all that responsive.
hw ver command
no, not "sh hw" Marshmellow wrote: "hw ver"
All commands needs to be runned inside the PM3 client.
Start the client by:
cd client
./proxmark3 com3
if you run linux,
"./proxmark3 /dev/ttyACM3"
Old wiki with LINUX:
https://code.google.com/p/proxmark3/wiki/Linux