Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
hi, everybody, i hope that your re fine, i would like if it's possible to hack card Calypso ISO/CEI 14443,, or clone this card ? i need some informations please, thanks very much!
no answer; just some help please?thanks
A friend tried to sniff a calipso card but something went wrong in receiving data back. It should be ISO14443B' and not ISO14443B so something should be different inside the protocol (older one). There is a specific post somewhere in this forum.
Last edited by asper (2014-09-24 18:25:46)
it's the card for underground in Paris, her name is navigo, i think it's very difficult to clone this card
You could try to use the iclass snoop function in the recent proxmark firmware.
It uses the same modulation and encoding, although the protocol/crc is different, in principle it should be possible to capture (raw) frames.You could try to use the iclass snoop function in the recent proxmark firmware.
It uses the same modulation and encoding, although the protocol/crc is different, in principle it should be possible to capture (raw) frames.
iclass snoop can be used to snoop ISO15693 protocol, not ISO14443AorB; to snoop ISO14443AorB there is a specific command.
If the protocol is ISO14443B' (as Calypso can be B') no snooping method will be correct because ISO14443B' is not a free-documented protocol (no datasheets available until now).
Last edited by asper (2015-02-09 15:08:16)