Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi guys,
Someone requested binaries of the latest code (including the EM410x reading/cloning/simulating commands), so I thought I'd drop a note.
You can grab the files (Windows client, Linux client, and firmware/bootrom) here:
http://proxmark3.googlecode.com/files/p … 03-r29.zip
Enjoy!
Awesome. Thanks, samy.
Just for those who are debating whether or not to try to set up a toolchain to build new code manually, does anyone know if there is a plan in the works to set up an automated build process for snapshots?
Not that I know of, but I'm happy to put up binaries for every major update that I commit.
I run OS X, so I can't automate much there. I run parallels to compile and run prox.exe, and I copied all of the code over to a Linux box I have access to to make Linux binaries for other people for their convenience. Not a convenient way for me to automate the entire thing though..but maybe I'll make a Windows script to auto-compile, ssh and compile, etc all together...
I'd be happy to post automated linux builds if we've got somewhere to put them, but I can't do doze.
Thinking about it, wouldn't it be simpler to just add the binaries to the repo so whenever you do a commit the current binaries are in there?
Thanks a lot samy for uploading the binaries...
I think that providing binaries for every build (or for every major build) is a wonderful idea. It's a quick and dirty way for people like me, who just received the board and haven't had the time to setup a build environment, to get the latest firmware up and running on their pm3.
Hi everybody,
First, Thanks for your work !
But ... after flashing my pm3 with the new binairies, the led red is always light on and the pm3 reboot.
Anybody have an idea ?
Yes ! I can answer in the same message : I am an idiot ! I must load the "bootrom-merged.s19" file in my pm3, not the "bootrom.s19".
And the new fonctionnalities appear.
Great !
Salut apmslyvain,
It's probably too late, and you might need the JTAG cable to flash a new firmware to your pm3, but here is valuable information for flashing the pm3:
- https://www.lafargue.name/article2752.html
- http://www.proxmark.org/forum/topic/76/ … -your-fix/
And from the last link, you can see the following commands that you have to issue in order to flash the 3 parts of the firmware:
..\winsrc\prox.exe bootrom ..\bootrom\obj\bootrom-merged.s19
..\winsrc\prox.exe fpga ..\armsrc\obj\fpgaimage.s19
..\winsrc\prox.exe load ..\armsrc\obj\osimage.s19
If you have an old firmware, you might need to flash each part two times, and if you have a new firmware, hold down the button on the proxmark before starting the commands.
I hope it helps ...
Hi rleroy,
No, it is not to late : my pm3 works great with the new firmware. I don't need a JTAG cable.
First, i do "prox bootrom bootrom.s19" and when my pm3 reboot in loop, I realize my mistake.
So, I do "prox bootrom bootrom-merged.s19" and now all is ok.
Thank you but it's fine.