Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2021-11-10 16:17:10
- Burak
- Contributor
- Registered: 2021-10-06
- Posts: 16
[solved] clone mifare card to CUID or UID card but reader do not react
Hello,
I cloned a hotel mifare card to a UID card and CUID card but none of them worked. Reader do not react. I attached both bin files both are same but only original one in the card works. What can be the reason and what can I do to make it work? Thanks,
Original tag:
Cloned tag:
UPDATE:
I realised card has two chips but it only uses low frequency chip. I do not think it uses HF chip. So I need to target to LF chip.
Last edited by Burak (2021-11-18 19:42:09)
#3 2021-12-18 12:23:04
- Burak
- Contributor
- Registered: 2021-10-06
- Posts: 16
Re: [solved] clone mifare card to CUID or UID card but reader do not react
Hi Burak, i see that you are new to Proxmark, i live in Turkey too, maybe i can help with your basic questions.
Hey isomail07, I just seen your message. I will be happy if you can help. Thanks,