Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-09-20 10:40:04

wilecoyote
Contributor
Registered: 2020-09-08
Posts: 2

MSD Standalone mode and reader commands

Hi all,

I've been using a slightly modified hf_msdsal to be able to read my card and extract track 2.

Then, in emulation mode the reader keep sending WAKEUP (0x52) but never send any command to the proxmark.

Did anybody know if timing issue can exist in the response of the proxmark to the WAKEUP ?

Thanks,

Offline

#2 2021-05-28 18:42:37

Trouduc50
Contributor
Registered: 2020-07-18
Posts: 3

Re: MSD Standalone mode and reader commands

Hello,
what modifications have you done to hf_msdsa? I seem to have the same issue.

Thanks

Offline

#3 2021-06-19 17:21:20

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: MSD Standalone mode and reader commands

Please do open an GH issue and explain what is the problem and how you solved it.

Offline

#4 2021-12-23 17:22:38

kosgguy
Contributor
Registered: 2021-12-18
Posts: 56

Re: MSD Standalone mode and reader commands

yes, paste the code here because the hf_msdsal original doesn't work.

Thanks

Offline

Quick reply

Write your message and submit

Board footer

Powered by FluxBB