Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi
Sorry but i'm not a c-programmer, but it would be nice to have Hitag types in the lf hitag info comand.
Next last digit in the serial determine the hitag types.
cmdlfhitag.c
// how to detemine Hitag types?
//uid s/n ********
//PCF7936 ******1*
//PCF7941 ******6*
//PCF7942/44 ******4*
//PCF7943 ******5*
//PCF7945 ******9*
//PCF7946 ******2*
//PCF7947 ******3*
//PCF7952 ******7*
Last edited by cosmo61 (2020-04-17 09:05:45)
This is only an Idea.
Disassemble the battery,and check if the backup-transponder is working
in the remote (passive LF for immobilizer).
Fourth-generation keyless entry/go IC (NCF2952/NCF2951)
} Increased sensitivity, 3 channel active LF interface for
125 kHz, 1 channel operation, plus passive LF for immobilizer
backup mode
https://www.nxp.com/docs/en/brochure/75017275.pdf
Last edited by cosmo61 (2020-04-30 17:59:45)