Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-04-16 12:07:37

The_swon_men
Contributor
Registered: 2020-01-14
Posts: 16

[solved] Install Iceman's RRG firmware

Hi,

I have a proxmark3 Easy. I would like to install Iceman's RRG firmware but I have a problem;
I start by uploading the space and the master to this address: "https://github.com/RfidResearchGroup/proxmark3"

I perform a "standard" installation then I compile the whole thing via the formula

make clean && make all

I make sure that the proxmark is discovered by my computer (it is well detected in COM9)
When I try to launch the firmware via

./client/proxmark3.exe COM9

the Windows command displays:

pm3 ~$ ./client/proxmark3.exe COM9
[=] Session log C:\Users\TSM\Desktop\ProxSpace-master\pm3/.proxmark3/log_20200416.txt
=] Using UART port com9
ERROR: cannot communicate with the Proxm

I don't understand what's going on... Can you help me, please?

Thanks
Best regards,
TSM

Last edited by The_swon_men (2020-04-18 10:00:10)

Offline

#2 2020-04-16 13:19:09

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: [solved] Install Iceman's RRG firmware

Offline

#3 2020-04-16 14:53:19

The_swon_men
Contributor
Registered: 2020-01-14
Posts: 16

Re: [solved] Install Iceman's RRG firmware

Hi Iceman,

Thanks for you help !
I followed the instructions step by step. I was wrong about the instruction.

client/proxmark3 /dev/ttyACM9

However, when I do this instruction I get this result:

pm3 ~$ client/proxmark3.exe /dev/ttyACM9
[=] Session log C:\Users\TSM\Desktop\ProxSpace-RRG-Iceman\pm3/.proxmark3/log_20200416.txt
[=] Using UART port C:/Users/TSM/Desktop/ProxSpace-RRG-Iceman/msys2/dev/ttyACM9

[!] ERROR: invalid serial port C:/Users/TSM/Desktop/ProxSpace-RRG-Iceman/msys2/dev/ttyACM9

I'm really sorry to bother you, Iceman. hmm

Best regards
TSM

Last edited by The_swon_men (2020-04-16 14:55:10)

Offline

#4 2020-04-16 15:52:24

The_swon_men
Contributor
Registered: 2020-01-14
Posts: 16

Re: [solved] Install Iceman's RRG firmware

Ok everythink is done !!
Thanks ! wink

Offline

#5 2020-04-16 16:43:18

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: [solved] Install Iceman's RRG firmware

Good that you solved your issue.  May I suggest you edit your first post and add the suffix [solved] to your subject line.

Offline

#6 2020-04-18 10:00:33

The_swon_men
Contributor
Registered: 2020-01-14
Posts: 16

Re: [solved] Install Iceman's RRG firmware

Yes it's done ! thanks !

Offline

Quick reply

Write your message and submit

Board footer

Powered by FluxBB