Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi again!
I'm having some issue trying to communicate with my RFID passport.
The only way I managed to get it to say something was to issue a raw command using hf 14b raw -c -p 05 00 08. hf search does not yield any results. Using the command above-mentioned, I managed to get what I think is its UID which it gives as part of the ISO14443 anti-collision protocol.
It seems like there is no apdu command for 14b, only for 14a. I believe that Proxmark's apdu is just a convenience command anyway and that it is possible to send and receive APDU messages just using the hf 14b raw command anyway.
My question is: how can I select my chip, and then send and receive ADPU messages, using the hf 14b raw command? I would have thought this would be a fairly obvious use case but I have been skimming through specifications and websites for days and I haven't managed to find the bytes I'm supposed to send anywhere...
Many thanks if you can help me,
rmdashrf
Last edited by rmdashrf (2019-01-24 11:47:03)