Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hello,
as I said in the welcome message I am struggling with tests on various tags, I have one that I can not identify.
I state that I am using this version:
pm3 --> hw ver
Proxmark3 RFID instrument
[ CLIENT ]
client: iceman build for RDV40 with flashmem; smartcard;
[ ARM ]
bootrom: iceman/master/bf7f33b0-dirty-unclean 2018-11-27 08:18:06
os: iceman/master/bf7f33b0-dirty-unclean 2018-11-27 08:18:13
[ FPGA ]
LF image built for 2s30vq100 on 2018/ 9/ 8 at 13:57:51
HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23
[ Hardware ]
--= uC: AT91SAM7S512 Rev B
--= Embedded Processor: ARM7TDMI
--= Nonvolatile Program Memory Size: 512K bytes, Used: 240603 bytes (46%) Free: 283685 bytes (54%)
--= Second Nonvolatile Program Memory Size: None
--= Internal SRAM Size: 64K bytes
--= Architecture Identifier: AT91SAM7Sxx Series
--= Nonvolatile Program Memory Type: Embedded Flash Memory
that would seem to identify the tag as an Indala type:
pm3 --> lf search
NOTE: some demods output possible binary
if it finds something that looks like a tag
False Positives ARE possible
Checking for known tags:
[+] Valid Indala ID Found!
Valid T55xx Chip Found
Try `lf t55xx` commands
but I can not perform read and write operations.
Analyzing the buffer would seem to be a stream of 6400 samples, with NR modulation, clock rate 64.
Trace https://www.sendspace.com/file/xbs1d0.
How can I be sure of the type and how can I get the data and then rewrite it on another tag?
Where can I find a guide for the indala tags?
Thank you very much