Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2018-11-17 18:12:30
- prxm
- Contributor
- Registered: 2018-11-16
- Posts: 5
Chameleon Mini: RevE Rebooted
Hi, I have also https://lab401.com/products/chameleon-mini-reve-rebooted - where can I find some information how use this version? On Github there is only flasing instruction, but in fact probably I don't need it atm. Mostly I just want test it, how it work etc 
.
#2 2018-11-17 19:56:50
- prxm
- Contributor
- Registered: 2018-11-16
- Posts: 5
Re: Chameleon Mini: RevE Rebooted
Hi, I tried as on video https://www.youtube.com/watch?v=1VpXC3-eKhc
I don't get it why on video there is TAG 2, not TAG 1 but I guess this was just inaccuracy between desktop/video recording.
I puted battery to my CHAMELEON and first of all there is only light when I keep press red (power) button, on video they don't press red button - my device don't have any light when we don't press.
So when I press red button, then I can with second hand press black button to change tags, tried 1-3 and there is none communication with doors which are opened by RFID.
After that I connected again and 'download dump', but there is nothing:
Why? I am doing something wrong?
My Chameleon in system is just like common device:
Do I need some special drivers?
Regarding my broken Proxmark case, Cameleon don't disconnecting from system, is always and without problems detected by this GUI v1.1.0.1.