Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I have a PM3 but it is "EASY" version from ELECHOUSE,which only have 256KB Memory,can I upgrade it to the lastest version on GitHub?Thanks,I don't want to make it bricked.
yes, that should not a problem with flashing fullimage.elf to it..
tks,don't need to flash bootrom again?
it all depends on how old your current firmware is...
bootrom: iceman/master/YEMA-PM3 Customization -unclean 2017-05-11 21:48:17
os: iceman/master/YEMA-PM3 Customization -unclean 2017-05-11 21:48:19
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at 9: 8: 8
As posted in your other thread, you are using a unknown modified version for iceman-fork.
You have to contact your retailer who sold you the proxmark3 and ask them for support.