Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
So I assume you figured out the nexkey.
Yes, it was easy, i setup for T55xx, same Bit Rate and modulation, then i copied the first 4 blocks, and it works.
But i have another questions.
I need to change the NexWatch ID.
The first block specifies the Data Bit Rate, modulation and the blocks they transmit.
The NexWatch ID has 8 digits.
i dont have the format of the netkey.
Last edited by Rfidman (2017-09-20 06:33:21)
This is a card I am interested in learning more about as I have encountered some recently at a client site. I see there's not many prebuilt commands for it in the Proxmark software. I'm just at the beginning stages of learning how to get information from a card that doesn't already have a prebuilt command set.
I read the one long thread figuring out the demod. Any other resources you could point me toward?
Check the wiki and use the command help if available