Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2017-01-12 23:27:35
- ltq1990
- Contributor
- Registered: 2017-01-12
- Posts: 25
Anyone familiar with this kind of keyfob? PM3 can detect it at all
Hi guys I got this fob from my friend, looks like it's LF tag, however I tried SEARCH LF, EM410xwatch, both failed to detected this tag, I also tried INVESTIGATE LF, all I found is noice， no actual wave signal.
Please share some opinions. Thanks in advance!
See the image here: http://www.sydneyunlocking.com.au/presco.png
#2 2017-01-13 04:15:31
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
presco was discussed on this topic.http://www.proxmark.org/forum/viewtopic.php?id=2795
if you are using the latest github code it should not be difficult to read the tag.
#3 2017-01-13 04:16:51
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
careful using the windows gui, it is not maintained. i suggest you give the command line a try.
#5 2017-01-13 09:14:59
- ltq1990
- Contributor
- Registered: 2017-01-12
- Posts: 25
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
presco was discussed on this topic.http://www.proxmark.org/forum/viewtopic.php?id=2795
if you are using the latest github code it should not be difficult to read the tag.
I tried to update to 2.5.0 but failed, I followed the instruction but suddenly a windows pop up shows "the program can't start because libusb0.dll is missing from your computer".
#6 2017-01-13 13:37:58
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
you are trying the precompiled distro by Asper. Its old.
Try @gator96100 's newer environment, http://www.proxmark.org/forum/viewtopic … 534#p25534
or try my docker container,
or run a linuxdistro (in a virtual box?)
#7 2017-01-14 14:16:25
- ltq1990
- Contributor
- Registered: 2017-01-12
- Posts: 25
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
you are trying the precompiled distro by Asper. Its old.
Try @gator96100 's newer environment, http://www.proxmark.org/forum/viewtopic … 534#p25534
or try my docker container,
or run a linuxdistro (in a virtual box?)
Thx, I just got my PM3 for 1 week and I have zero knowledge of using github and I had a hard time finding a clear instruction to update firmware, but I will try my best to figure it out.