Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
- Logged in as ikarus
- Last visit: Today 11:22:42
- Topics: Posted | New | Active | Unanswered
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2016-10-13 11:47:45
- earlneo
- Contributor
- Registered: 2016-10-01
- Posts: 36
[SOLVED] Write ultralight dump data into normal classic 1k card?
Hi Iceman/all,
It is possible to write ultralight dump data into normal classic 1k card?
How do I change classic 1k card type (ATQA, SAK) into Ultralight?
pm3 --> hf 14a reader
UID : 04 47 BB 6A CC 48 81
ATQA : 00 44
SAK : 00 [2]
TYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)
MANUFACTURER : NXP Semiconductors Germany
proprietary non iso14443-4 card found, RATS not supported
Answers to magic commands (GEN1): NO
Last edited by earlneo (2016-10-13 16:50:39)
#2 2016-10-13 12:53:03
Re: [SOLVED] Write ultralight dump data into normal classic 1k card?
I think you fail to understand that the UL-EV1 is a different kind of tag which has commands that a Mifare Classic S50 doesn't have. So even if you can write the dumped values from a UL-ev1 tag on to a s50, it will not be able to pass as such tag.
#5 2016-10-13 14:39:30
- earlneo
- Contributor
- Registered: 2016-10-01
- Posts: 36
Re: [SOLVED] Write ultralight dump data into normal classic 1k card?
i believed you iceman. thanks. looks like my friend have to purchase UL-EV1 stock card instead.
Price for UL-EV1 card is higher than Classic 1k card due to the demand for classic 1k is higher. Too bad.