Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Yesterday I received the proxmark and all I've gotten has been that the relay and some other LED (green LED) is rhythmically activated every 15 or 20 seconds
I read a few manuals but I do not have clear
I think I've managed to change the boot to CDC
I thought it might be easier to use a JTAG interface, I have one with a chip 74hc244n but not if if it or use that program to upload the file s19
I am using Windows XP
My encounter with the proxmark definitely has not been a love at first sight
I have a bit of a hurry because I have a key that need to clone T5577
Thanks to everybody
I'm having a lot of problems trying to flashing the fullimage.elf.The flasher stops and do nothing
I have installed tortoisesvn but I get the error: "unable to conect to a repository" when I try to update files
maybe update files can be a good option
thank you
Last edited by xugmu (2016-06-30 09:28:30)
Windows only recognizes the proxmark when I have the button pressed , when it is released the proxmark disappears from device manager and then have to reinstall the driver again
I think the first thing I have to do is install the driver well
thank you
Last edited by xugmu (2016-06-30 10:54:16)
Its been mentioned on the forum several times, you need a new fullimage if you updated the bootrom. get the latest source from github and compile it.
then unconnected pm3, press button, keep it pressed, connect to computer w usb, while pressing re-flash fullimage, release button. its a one-hand operation.
all files I'm using come from "pm3-bin-756"
What catches my attention is that the flashers expect to proxmarx into a USB port
and the device manager installs me in a com port, sometimes COM11 sometimes another
The flasher waits but does nothing
I tried with two drivers : proxmark3.inf and libusb-win32 (old USB interface)
thank you
Last edited by xugmu (2016-06-30 12:58:49)
24 hours later I still can not communicate with the proxmark
I have an explanation, perhaps the flasher does not know the com port and I tell him there somehow
otherwise I think it could be directly use the jtag
maybe I damaged the boot and so the flasher does not recognize it as a USB device
Last edited by xugmu (2016-06-30 21:25:07)
Going by https://github.com/Proxmark/proxmark3/wiki/Windows
you will need to edit (righ-click -> ”Edit”) the following batch you can find under “win32” folder:
FLASH - Bootrom.bat
FLASH - FPGA fullimage.bat
FLASH - OS.bat
In those files you need to change the com port number after the “flasher.exe” according to YOUR Proxmark3 current port number !
You will now be able to flash bootloader, OS image and FPGA without holding down the Proxmark3 button !
Ggooooooodddddd,everything is ok now
I had tried to do something similar before but was obsessed with the file " FLASH - NEW Bootrom (uses old flasher exe with -b option).bat" that curiously does not contain the command "flasher.exe" .For that I could not edit
Thanks everyone for your help