Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi, guys,
I can't write the uid "2dc263cb8" using the command [ lf indalaclone 2dc263cb8 ] ,, after cloning the uid it appear "05b84c797" , anyone can tell what happen to the command ?? thanks.
Recovered 498 raw bits
worst metric (0=best..7=worst): 4 at pos 40
UID=0000000000000000000000000000001011011100001001100011110010111000 (2dc263cb8)
Occurences: 1 (expected 5)
Cloning 64bit tag with UID 2dc263cb8
#db# DONE!
#db# buffer samples: 6e 86 6e 83 6a 83 6d 85 ...
Reading 16000 samples
Done!
Expecting a bit less than 500 raw bits
Recovered 485 raw bits
worst metric (0=best..7=worst): 8 at pos 208
UID=0000000000000000000000000000000001011011100001001100011110010111 (05b84c797)
Occurences: 7 (expected 7)
Cloning 64bit tag with UID 2dc263cb8
#db# DONE!
#db# buffer samples: 86 6b 85 6c 87 6d 84 6f ...
Reading 16000 samples
Done!
do you need the full 10 digits with leading zeros? (can't remember off hand)
My bad.. was thinking EM not indala.. sorry.
Last edited by marshmellow (2014-12-11 19:03:31)
2dc263cb8 vs 05b84c797:
1011011100001001100011110010111000
1011011100001001100011110010111
It's just a shifting of bits, pad with a few zeroes on the right and it's correct. Have you tested if this isn't in fact correct (as in; fools a reader)?
its even hinted in the output, look at the "worst metric" row.
worst metric (0=best..7=worst): 4 at pos 40
UID=0000000000000000000000000000001011011100001001100011110010111000 (2dc263cb8)
Done!
worst metric (0=best..7=worst): 8 at pos 208
UID=0000000000000000000000000000000001011011100001001100011110010111 (05b84c797)
proxmark3> lf read
#db# Sampling config:
#db# [q] divisor: 95
#db# bps: 8
#db# [d] decimation: 1
#db# [a] averaging: 1
#db# [t] trigger threshold: 0
#db# Done, saved 40000 out of 40000 seen samples at 8 bits/sample
#db# buffer samples: 75 76 75 77 76 77 76 76 ...
proxmark3> data samples 16000
Reading 16000 bytes from device memory
Data fetched
Samples @ 8 bits/smpl, decimation 1:1
proxmark3> lf indalademod
Recovered 466 raw bits, expected: 500
worst metric (0=best..7=worst): 8 at pos 144
UID=0000000000000000000000000000000000000000000000000000000000000000 (000000000)
Occurrences: 7 (expected 7)
proxmark3>
I cannot read the id
Wow a double post hijacker gj.
make sure you've updated your firmware and run the newer commands.
see: http://www.proxmark.org/forum/viewtopic.php?id=2260
and read up.