Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hey guys,
I'm pretty new to this so bear with me.
I've got a proxmark3 fresh out of the box, and i'm trying to scan one of my cards which doesnt seem to be getting detected easily, and when it does get detected I never get the same values.
Proxmark 3 version:
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 0 2014-04-01 12:12:24
#db# os: svn 0 2014-04-01 12:12:24
#db# FPGA image built on 2014/03/24 at 21:54:44
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
HW TUNE (Tag on antenna):
# LF antenna: 5.24 V @ 125.00 kHz
# LF antenna: 5.10 V @ 134.00 kHz
# LF optimal: 12.49 V @ 244.90 kHz
# HF antenna: 0.58 V @ 13.56 MHz
# Your HF antenna is unusable.
HW TUNE (Tag off antenna):
# LF antenna: 5.24 V @ 125.00 kHz
# LF antenna: 5.24 V @ 134.00 kHz
# LF optimal: 16.25 V @ 222.22 kHz
# HF antenna: 0.71 V @ 13.56 MHz
# Your HF antenna is unusable.
The data I get with the card i've got (This is a used card that works for sure)
Its hard to get a read off of the card I have to move it around and it doesnt always detect when its sitting right on the antenna but these are the Tag ID's I keep getting:
#db# TAG ID: 000000001 (0)
#db# TAG ID: 00000000d (6)
#db# TAG ID: 000000003 (1)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000003 (1)
#db# TAG ID: 000000002 (1)
#db# TAG ID: 000000009 (4)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000007 (3)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000005 (2)
#db# TAG ID: 00000001c (14)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000003 (1)
#db# TAG ID: 000000001 (0)
#db# TAG ID: 000000001 (0)
I have tried the HF antenna as well but I really do get nothing on that one. What am I doing wrong?
Is there any other data I can provide for assistance?
Best thing to do is run hw tune,
then place a card on the antenna
and run hw tune (with the card on the antenna).
Repeat for the other antenna, and post your results here