Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2013-07-27 19:21:09

RhysM
Member
Registered: 2013-07-27
Posts: 4

em410x module

Good Day,
I wasn't initially going to post this here, but maybe it could do better here.
Its a new module for reading, decoding and emulating em410x tags.

I wasn't going to post it here as it doesn't completely agree with the recommended coding style. However. I have included links to versions of the the modified source files.
The base version I was building upon was revision 702.

http://theundead.atspace.com/Blog/cmddata.c
http://theundead.atspace.com/Blog/cmddata.h
http://theundead.atspace.com/Blog/cmdlfem4x.c
http://theundead.atspace.com/Blog/cmdlfem4x.h

My original blog post contains a few screenshots of it in operation, but otherwise all the relevant files are above: (So I really don't mean to paste this link for self-advertisement.)
http://somebastardstolemyname.wordpress.com/2013/06/01/proxmark3-code-emulate-em410x

Thanks.
Rhys.

Offline

#2 2013-07-27 21:41:24

moebius
Contributor
Registered: 2011-03-10
Posts: 206

Re: em410x module

I'm not sure but, isn't that functionality already in Proxmark3?

Cheers!

Offline

#3 2013-07-27 21:59:20

RhysM
Member
Registered: 2013-07-27
Posts: 4

Re: em410x module

Hi!
It is, but we found it too buggy and unreliable for the purpose of doing presentations.
Where it wouldn't successfully process parity and display the internal ID. Rather than correcting things I chose to rewrite.
Rhys.

Offline

#4 2013-07-27 22:01:35

moebius
Contributor
Registered: 2011-03-10
Posts: 206

Re: em410x module

OK! Thanks for your answer.

Offline

#5 2013-08-05 17:09:13

Tsim
Member
Registered: 2013-07-11
Posts: 5

Re: em410x module

Hi,

Is the em410xwrite command working for you ?

I have my T55x7 tags, but impossible to write / clone UID to them.

Offline

#6 2013-08-05 20:31:49

RhysM
Member
Registered: 2013-07-27
Posts: 4

Re: em410x module

I never had access to any T55x7 tags to try.
I assume the problem is the same as I was having, most likely with the original parity function.

Offline

#7 2013-08-06 09:52:28

Tsim
Member
Registered: 2013-07-11
Posts: 5

Re: em410x module

Hum I don't know, i'm using rev 702 patched with your files, it doesn't work much.

I always succeed to read EM4x ID (sometimes after mutiples tries, but un less than 5 seconds).
However, I never succeed to write any information (especially block 0) on a T55x7 tag.

That's why I asked if it worked for somebody, to check if the problem is from the proxmark code or my tags (btw : http://www.aliexpress.com/item/Free-shipping-10-pcs-lot-RFID-ID-Rewritable-Readable-T5567-T5577-T5557-Cards/725978734.html)

Thanks for you answer anyway smile

Offline

#8 2013-08-13 14:53:35

RhysM
Member
Registered: 2013-07-27
Posts: 4

Re: em410x module

When you say it doesnt work much, are you using my function to read an em4x tag? If so Im completely confused as my experience was the direct opposite.
Well I'll have a look once I get my new proxmark soon (the one I was using belonged to my prior place of work).

Offline

#9 2013-08-22 14:52:21

Tsim
Member
Registered: 2013-07-11
Posts: 5

Re: em410x module

Well, I'm using yours, and the original one, there is no difference for me : I can read em410x tags.
I wasn't able to write on a T55xx tag anyway, but I tried to order new T55xx cards, from ebay just in case... And it worked.

My new tags are writable, I guess the first Chinese supplier owned me smile

Offline

Quick reply

Write your message and submit

Board footer

Powered by FluxBB