Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2013-03-18 23:19:15

b0ngokarl
Contributor
Registered: 2013-01-17
Posts: 16

hf mf mifare does not work

Hi,

I have some 100 blank white mifare cards here on my desk. They are untouched have 4B UID and think they are rather new.

I know the keys are default FF FF FF FF FF FF for type A and B.

If I run hf mf mifare it does

-------------------------------------------------------------------------
Executing command. It may take up to 30 min.
Press the key on the proxmark3 device to abort both proxmark3 and client.
-------------------------------------------------------------------------
...............................................................................

isOk:01   #db# COMMAND  mifare   FINISHED


uid(e0a79a7c) nt(267c4aff)   par(000076766e5e4e7e)  ks(050c000405090e02)



|diff|{nr}    |ks3|ks3^5|parity         |
+----+--------+---+-----+---------------+
| 00 |00000000| 5 |  0  |0,0,0,0,0,0,0,0|
| 20 |00000020| c |  9  |0,0,0,0,0,0,0,0|
| 40 |00000040| 0 |  5  |0,1,1,0,1,1,1,0|
| 60 |00000060| 4 |  1  |0,1,1,0,1,1,1,0|
| 80 |00000080| 5 |  0  |0,1,1,1,0,1,1,0|
| a0 |000000a0| 9 |  c  |0,1,1,1,1,0,1,0|
| c0 |000000c0| e |  b  |0,1,1,1,0,0,1,0|
| e0 |000000e0| 2 |  7  |0,1,1,1,1,1,1,0|
Key not found (lfsr_common_prefix list is null). Nt=267c4aff

all day long. No matter which card I try.

Its a original board and original antenna - is this happening because of the low voltages?

(hw tune with nothing in field, dip set to on)

# LF antenna:  0.00 V @   125.00 kHz
# LF antenna:  0.13 V @   134.00 kHz
# LF optimal:  0.00 V @ 12000.00 kHz
# HF antenna:  8.19 V @    13.56 MHz
# Your LF antenna is unusable.

I left the LF antenna so it is not with me at the moment but its not that powerfull too

I'm running the latest cdc build from the forum -

hw version:

#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 671 2013-03-07 17:12:17
#db# os: svn 671 2013-03-07 17:12:31
#db# FPGA image built on 2012/ 1/ 6 at 15:27:56

Thanks!

Jonas

Offline

#2 2013-05-06 07:52:41

holiman
Contributor
Registered: 2013-05-03
Posts: 566

Re: hf mf mifare does not work

You seem to be suffering from the same issue as me - the first two bytes of the parity list are being cleared, for some reason. See page five of http://www.proxmark.org/forum/viewtopic … 7131#p7131 .

Last edited by holiman (2013-05-06 21:00:57)

Offline

#3 2013-05-06 20:58:47

holiman
Contributor
Registered: 2013-05-03
Posts: 566

Re: hf mf mifare does not work

I found the bug, it's a subtle one which has pretty nasty side-effects. See http://www.proxmark.org/forum/viewtopic.php?pid=7141#p7141
http://www.proxmark.org/forum/viewtopic … 7141#p7141

AFAICT, this affects all platforms, and the CVS-trunk for this feature is currently br0kken.

Offline

#4 2013-05-24 22:44:20

holiman
Contributor
Registered: 2013-05-03
Posts: 566

Re: hf mf mifare does not work

For future reference, in case someone stumbles upon this, this issue was fixed in r710.

Offline

Quick reply

Write your message and submit

Board footer

Powered by FluxBB