Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I would like to copy my mifare classic 1k fob, I have the Proxmark 3, a reader, hf antenna, can someone tell me the sequence of commands that i need to do, I hw tune x 2 once without the fob and once with the fob, I can hf 14a reader and get:
Connected units:
1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
proxmark3> hw tune
#db# Measuring antenna characteristics, please wait.
# LF antenna: 0.00 V @ 125.00 kHz
# LF antenna: 0.00 V @ 134.00 kHz
# LF optimal: 0.00 V @ 12000.00 kHz
# HF antenna: 9.47 V @ 13.56 MHz
# Your LF antenna is unusable.
proxmark3> hw tune
#db# Measuring antenna characteristics, please wait.
# LF antenna: 0.00 V @ 125.00 kHz
# LF antenna: 0.00 V @ 134.00 kHz
# LF optimal: 0.00 V @ 12000.00 kHz
# HF antenna: 9.51 V @ 13.56 MHz
# Your LF antenna is unusable.
proxmark3> hf 14a reader
ATQA : 04 00
UID : 60 e1 7d 6b 00 00 00 00 b6 a3 2e c7
SAK : 08 [2]
SAK : MIFARE CLASSIC 1K
proprietary non-iso14443a card found, RATS not supported
What is it I need to do next, as you can tell i'm totally new at this, any help would be appreciated
Anybody have any ideas on the 'hf mf chk *1 ? t' returning a 'there is must be at least one key?
I seem to be having problems all round.
Can Proxmark be installed on Vista if so can someone point me in the right direction for the downloads.