Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

  • Logged in as ikarus
  • Last visit: Today 11:22:42

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2022-04-22 03:21:17

Marceloadr
Contributor
Registered: 2022-04-21
Posts: 3

problems with the field, I don't find a solution, help me..

guys, help me, I searched in almost every forum and I didn't find a topic about it, thats my first post and forgive me if I'm repeating a post but my proxmark is telling me that the field is disabled and I searched everything into software and I didn't find it how to enable, the tune measurement is ok, the tests are ok but it appears with the field off, help there please.


even putting -k or typing command to force activation, does not activate.
this happens in all commands that need contactless card, already in the contact card it is normal.

-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Retry failed [A0000006723020]. Skipped...
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Retry failed [A0000007705850]. Skipped...
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Retry failed [D27600002545500100]. Skipped...
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Retry failed [D4100000030001]. Skipped...
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Retry failed [D5280050218002]. Skipped...
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Retry failed [D5780000021010]. Skipped...
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Retry failed [F0000000030001]. Skipped...
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Field currently inactive, cannot send an APDU
[-] ⛔ Retry failed [A0000008381010]. Skipped...
[+] Search completed.
[=] |------------------+--------+-------------------------|
[=] |    AID           |Priority| Name                    |
[=] |------------------+--------+-------------------------|
[=] |                         none                        |
[=] |------------------+--------+-------------------------|
[usb] pm3 -->


and when I go to measure the antenna, when I approach the card the value changes, it seems to me that it is responding normally, right ??

[usb] pm3 --> hf tune
[=] Measuring HF antenna, click pm3 button or press Enter to exit
^C] 44326 mV / 44 V / 46 Vmax   

[usb] pm3 --> lf tune
[=] Measuring LF antenna at 125.00 kHz, click pm3 button or press Enter to exit
[=] 36360 mV / 36 V / 37 Vmax

Offline

#2 2022-04-23 12:32:22

iceman
Administrator
Registered: 2013-04-25
Posts: 9,468
Website

Re: problems with the field, I don't find a solution, help me..

What does the help text say?

Offline

#3 2022-04-23 22:35:45

Marceloadr
Contributor
Registered: 2022-04-21
Posts: 3

Re: problems with the field, I don't find a solution, help me..

lol, sorry boss ! i found it, I spent good hours looking for this and I was right in the same place,
but that's the only way to learn, right? forgive that poor newbie soul. tthnks  for the tip

Offline

Quick reply

Write your message and submit

Board footer

Powered by FluxBB