Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
HI Guys. Im having trouble cloning a HID card on my new macbook with an old pm3
What am i missing here?
How do i clone this?
Things have changed. I havent been keeping up.
Any help is much appreciated.
Thanks
APT.
[usb] pm3 --> lf hid rea
[+] [H10302 ] HID H10302 37-bit huge ID CN: 4840732364 parity ( fail )
[+] [H10304 ] HID H10304 37-bit FC: 9232 CN: 505548 parity ( fail )
[+] [MDI37 ] PointGuard MDI 37-bit FC: 9 CN: 8894156 parity ( fail )
[=] found 3 matching formats
[+] DemodBuffer:
[+] 1D555559655655AA69A69695
[=] raw: 0000000000000002410f6d98
[ Proxmark3 RFID instrument ]
[ CLIENT ]
client: RRG/Iceman/master/v4.14434 2021-09-18 21:44:55
compiled with Clang/LLVM Apple LLVM 13.0.0 (clang-1300.0.29.3) OS:OSX ARCH:aarch64
[ PROXMARK3 ]
firmware.................. PM3 GENERIC
[ ARM ]
bootrom: RRG/Iceman/master/v4.14434 2021-09-18 21:44:55
os: RRG/Iceman/master/v4.14434 2021-09-18 21:44:55
compiled with GCC 10.2.1 20201103 (release)
[ FPGA ]
LF image built for 2s30vq100 on 2020-07-08 at 23:08:07
HF image built for 2s30vq100 on 2020-07-08 at 23:08:19
HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23:08:30
[ Hardware ]
--= uC: AT91SAM7S512 Rev B
--= Embedded Processor: ARM7TDMI
--= Internal SRAM size: 64K bytes
--= Architecture identifier: AT91SAM7Sxx Series
--= Embedded flash memory 512K bytes ( 53% used )